Product detail


Komax – BT 722

This BenchTop crimper is outstanding in terms of short cycle times, short changeover and setup times, programmable crimp height and the user-friendly TopTouch interface. These features, combined with the optional programmable stripper and bad crimp cutter, ensure top quality finished conductors regardless of the machine operator. Function Quality monitored crimping of single and multi-core cables is no problem with the semi-automatic bt 722 crimper, not even when ultra-short stripping lengths are involved. Standard commercial crimp tools (side and back feed) can be used for processing. Optimum controls The controls are on a color touch screen and available in several different languages. System operation is fast, logical and symbol-based with the TopTouch user interface. Quality The programmable crimp height, integrated CFA / CFA+ crimp force analysis and bad crimp cutter ensure a final product of top quality. Quality measurements are mandatorily required during production setup. Once the measured values are entered, any deviations are automatically corrected; production is released when the measured values match the specified ones. This approach eliminates errors that can arise, for example, when the operator manually sets the crimp height. Only one crimp is needed for referencing the integrated crimp force analysis. This feature reduces the material used and minimizes the setup time. Accessories/options Programmable stripper Bad crimp cutter Terminal strip chopper Active paper winder Air feed set Short shield length Crimper table Sequence processing Pressure regulator set Crimp module analyzer Optional stripper With the programmable stripper unit, the device can be set up without mechanical adjustment. All required processing parameters can be set and saved in the TopTouch user software. The zero-cut and wayback for pull-off functions combine with a programmable cutting depth function to assure perfect stripping. Optional bad crimp cutter The bad crimp cutter cuts off any crimp detected as bad by the crimp force analyzer. You can program whether the cut is to go directly through the terminal or through the conductor. Cutting through the terminal involves less loss of cable length, allowing further use of the conductor. Optional sequence processing If you use sequence processing to process a multi-core cable that has, for example, different conductor cross sections but the same terminal, you only need to handle the cable once. The conductors can be manufactured with different crimp heights and different types of crimp force analysis. The machine operator is visually guided through shielded cable production.

This BenchTop crimper is outstanding in terms of short cycle times, short changeover and setup times, programmable crimp height and the user-friendly TopTouch interface. These features, combined with the optional programmable stripper and bad crimp cutter, ensure top quality finished conductors regardless of the machine operator.
Function
Quality monitored crimping of single and multi-core cables is no problem with the semi-automatic bt 722 crimper, not even when ultra-short stripping lengths are involved. Standard commercial crimp tools (side and back feed) can be used for processing.
Optimum controls
The controls are on a color touch screen and available in several different languages. System operation is fast, logical and symbol-based with the TopTouch user interface.
Quality
The programmable crimp height, integrated CFA / CFA+ crimp force analysis and bad crimp cutter ensure a final product of top quality. Quality measurements are mandatorily required during production setup. Once the measured values are entered, any deviations are automatically corrected; production is released when the measured values match the specified ones. This approach eliminates errors that can arise, for example, when the operator manually sets the crimp height.
Only one crimp is needed for referencing the integrated crimp force analysis.
This feature reduces the material used and minimizes the setup time.
Accessories/options
Programmable stripper
Bad crimp cutter
Terminal strip chopper
Active paper winder
Air feed set
Short shield length
Crimper table
Sequence processing
Pressure regulator set
Crimp module analyzer
Optional stripper
With the programmable stripper unit, the device can be set up without mechanical adjustment. All required processing parameters can be set and saved in the TopTouch user software. The zero-cut and wayback for pull-off functions combine with a programmable cutting depth function to assure perfect stripping.
Optional bad crimp cutter
The bad crimp cutter cuts off any crimp detected as bad by the crimp force analyzer. You can program whether the cut is to go directly through the terminal or through the conductor. Cutting through the terminal involves less loss of cable length, allowing further use of the conductor.
Optional sequence processing
If you use sequence processing to process a multi-core cable that has, for example, different conductor cross sections but the same terminal, you only need to handle the cable once.
The conductors can be manufactured with different crimp heights and different types of crimp force analysis. The machine operator is visually guided through shielded cable production.

Width700 mm
Height750 mm
Weight110 kg
Power240 VAC / 50 Hz / 60 Hz
Compressed airYes
Min. Cross-section0.05 mm²
Max. Cross-section6 mm²
Max. strip lenght12 mm
Crimp force20 kN
StripperOptional