The Exmore benchtop crimping presses are designed for the
production of single and multi-conductor cables. The crimp presses
are not only available with a standard foot pedal, but also with a twohanded
activation or start sensor.
These crimping presses are outstanding in terms of short cycle
times, short changeover and setup times. The “patent pending”
drive system ensures the short cycle time with a long crimping time.
Most of the presses crimp only for 40 ms. (time that the press is in
LDP). The Exmore Press crimps 200 ms, which is 5x longer, and the
springback effect of e.g. steel contacts is massively reduced. Even with
the crimping of smaller terminals the press will give longer lasting
Our drive system ensures stable CPK values and a low-noise
operation. The optional crimp force monitoring, which comes with
the press, detects good and bad wires reliably and gives a detailed
description of the error.
|Power||230 V / 50 Hz / 60 Hz|