kolb Cleaning technology - Fully automatic maintenance cleaner AF30
KOLB-090030AF
Fully automatic one chamber XL system with AirFlow® technology
kolb Cleaning technology - Fully automatic maintenance cleaner AF30
KOLB-090030AF
Fully automatic one chamber XL system with AirFlow® technology
Contactez-nous
Besoin d'assistance, d'installation et/ou de formation ?
Appelez-nous +32 (0)14 42 44 01 ou contactez nous
Nick Janssen
Product specialist
Description
kolb AF30 is a state of the art one chamber XL system with AirFlow® turbulence air-in-immersion technology and ClosedLoop water reprocessing. It cleans components of flux management systems (cooling units, filters, heat exchangers, containers / plates) of virtually all manufacturers as well as lathe parts, milled parts or die cast components from flux, condensate, oil, dust, grease using the economic and environmentally friendly AirFlow® technology.
In the fully automatic AF30 the parts are cleaned, rinsed and dried in one single process chamber which is empty during the loading (no contact to the detergent). After placing the goods to be cleaned into the chamber it is pressure flooded with fine filtered cleaning fluid from a separate tank (tank A) through a PLC-controlled process.
After the goods are cleaned the likewise filtered rinsing media, e.g. water, is pumped into the process chamber from a second tank. After the rinsing the rinse media is pumped out and the drying with a triple HotSpeed warm air unit starts. kolb AF30 is pre-equipped for extended water management.
Highlights
- Fully automatic one chamber system
- Plug & Work system (connect, fill, start)
- PLC controlled
- High resolution 7″ display with capacitative multi-touch
- Loading and unloading in an empty process chamber
- Comfortable push-one-button operation
- Fully automatic 3step process: cleaning, rinsing (tap water), drying with threefold HotSpeed warm air
- Automatic re-dosage and concentrate mix-unit
- Automatic water change for the rinsing tank
- Maintenance and operation events PLC controlled and displayed
- Customized solder-frame and carrier fixture available on demand
- Simple and quick maintenance
- All safety relevant devices are standard features in the basic system configuration
- Comfortably compact system dimensions (height only 1.430 mm)
- Certified for solar cell production
Specifications
| Technology base | kolb AirFlow® / Ultrasonic |
| Control system (Display size) | PLC - Eaton (7“) |
| Standard capacity (per process cycle) | Filters, condensation traps, carriers up to 1,300 x 450 x 600 mm |
| Process chamber dimensions | W 1300 mm • D 450 mm • H 600 mm |
| Max. stencil, carrier, washing frame size | H 1290 mm x W 500 mm |
| Circuits | 2+ Cleaning, Rinsing tap water / Rinsing DI-water (combined) |
| Volume Tank A | 475 l • Cleaning |
| Volume Tank B/C | 475 l • Rinsing tap water / Rinsing DI-water (combined) |
| Max. cleaning temperature | 50 °C (122 °F) |
| Filtration | Three stages - 1. Full flow coarse filter < 2 mm, 2. Skimmer coarse filter, 3. Fine filter 20“ / 100 - 50 - 10 µm in the circuits |
| Drying System | CTS HotSpeed warm air |
| Drying temperature range | approx. 40 - 55 °C (104 and 131 °F) |
| Power supply | 400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz |
| Power consumption | 3 kW |
| Supply connection 1 (tap water) | 1“ |
| Supply connection 3 (Compressed Air) | 12 mm (87 - 174 psi - 100 l / min) |
| Empty Weight | 750 kg (1,654 lbs) |
| Footprint | 2400 mm x 1600 mm (94.49″ x 62.99″) |
kolb AF30 is a state of the art one chamber XL system with AirFlow® turbulence air-in-immersion technology and ClosedLoop water reprocessing. It cleans components of flux management systems (cooling units, filters, heat exchangers, containers / plates) of virtually all manufacturers as well as lathe parts, milled parts or die cast components from flux, condensate, oil, dust, grease using the economic and environmentally friendly AirFlow® technology.
In the fully automatic AF30 the parts are cleaned, rinsed and dried in one single process chamber which is empty during the loading (no contact to the detergent). After placing the goods to be cleaned into the chamber it is pressure flooded with fine filtered cleaning fluid from a separate tank (tank A) through a PLC-controlled process.
After the goods are cleaned the likewise filtered rinsing media, e.g. water, is pumped into the process chamber from a second tank. After the rinsing the rinse media is pumped out and the drying with a triple HotSpeed warm air unit starts. kolb AF30 is pre-equipped for extended water management.
Highlights
- Fully automatic one chamber system
- Plug & Work system (connect, fill, start)
- PLC controlled
- High resolution 7″ display with capacitative multi-touch
- Loading and unloading in an empty process chamber
- Comfortable push-one-button operation
- Fully automatic 3step process: cleaning, rinsing (tap water), drying with threefold HotSpeed warm air
- Automatic re-dosage and concentrate mix-unit
- Automatic water change for the rinsing tank
- Maintenance and operation events PLC controlled and displayed
- Customized solder-frame and carrier fixture available on demand
- Simple and quick maintenance
- All safety relevant devices are standard features in the basic system configuration
- Comfortably compact system dimensions (height only 1.430 mm)
- Certified for solar cell production
