Ersa - Stencil Printer VERSAPRINT 2 ELITE PLUS
SAEP-c82e8223
Ideal printer for line production without 100% inspection
Ersa - Stencil Printer VERSAPRINT 2 ELITE PLUS
SAEP-c82e8223
Ideal printer for line production without 100% inspection
Besoin d'assistance, d'installation et/ou de formation ?
Appelez-nous +32 (0)14 42 44 01 ou contactez nous
Description
The Ersa Stencil Printer ELITE plus is perfectly suited for line production when a 100% inspection is not needed – e.g. because an SPI system already exists in the line – and convinces with its simple operation. Equipped with an surface camera with two separate camera modules. Due to different types of illumination, even difficult structures on the substrate can be recognized.
Specifications
Print head | two independent squeegee heads with continuous squeegee force control, squeegee depth stop and pendulum limitation |
Cycle time | 10 s + print |
Optional stencil cleaner | 680 x 500 mm Squeegee force: 0-230 N |
Time to set up | less than 10 min |
Substrate thickness | 0.5-6 mm |
Camera | 3D line scan camera for alignment and inspection of substrate and stencil |
Product changeover | under 2 min |
Part clearance | up to 35 mm |
Repetition accuracy | +/-12.5 µm @ 6 Sigma |
Graphical user interface | touch screen |
Stencil size | min. 450 x 450 mm, max. 737 x 737 mm adjustable without tools |
Printing accuracy | +/-25 µm @ 6 sigma |
The Ersa Stencil Printer ELITE plus is perfectly suited for line production when a 100% inspection is not needed – e.g. because an SPI system already exists in the line – and convinces with its simple operation. Equipped with an surface camera with two separate camera modules. Due to different types of illumination, even difficult structures on the substrate can be recognized.
Type | Standard Board Size Printer |
---|