Loepfe - Hotmarking unit Z-283
LOE-Z2831
The Z-283 is an electro-pneumatic thermal stamping unit used to imprinting cables, wires and flat materials
Loepfe - Hotmarking unit Z-283
LOE-Z2831
The Z-283 is an electro-pneumatic thermal stamping unit used to imprinting cables, wires and flat materials
Besoin d'assistance, d'installation et/ou de formation ?
Appelez-nous +32 (0)14 42 44 01 ou contactez nous
Description
The Z-283 can be used either as a normal table marking unit with a foot pedal, or it can be connected to a cutter unit. The existing interface allows the connection to products by different manufacturers. Wire straightener, foil rewinding system and wheel lock are add-ons allowing for large series production. The Z-283 is an electro-pneumatic thermal stamping unit used to imprinting cables, wires and flat materials. This hot stamping process produces high-quality, abrasive-resistant markings.
Specifications
Power supply | 230 VAC or 115 VAC, 50 - 60 Hz, max. 200 VA |
Compressed air | 7 bar |
Cable Ø | min. 1.2 mm, max. 7.0 mm with production line, 14 mm with single stamping |
Characters per wheel | Type 1: A - Z . space - Type 2: 0 - 9 . / - + A-M - Type 3: 0 - 9 . / - + N-Z - Type 4: 0 - 9 . / - + |
Foil width | 29 mm / 58 mm |
Dimensions (W x H x D) | 380 x 260 x 220 mm |
Weight | 8,2 kg |
The Z-283 can be used either as a normal table marking unit with a foot pedal, or it can be connected to a cutter unit. The existing interface allows the connection to products by different manufacturers. Wire straightener, foil rewinding system and wheel lock are add-ons allowing for large series production. The Z-283 is an electro-pneumatic thermal stamping unit used to imprinting cables, wires and flat materials. This hot stamping process produces high-quality, abrasive-resistant markings.