Cable Cleaning Device BERI.CO.CLEAN
The electro-pneumatic BERI.CO.CLEAN devices have been designed for facilities responsible for cleaning cables, wires, catheters, etc.
Cable Cleaning Device BERI.CO.CLEAN
The electro-pneumatic BERI.CO.CLEAN devices have been designed for facilities responsible for cleaning cables, wires, catheters, etc.
Description
The electro-pneumatic BERI.CO.CLEAN devices have been designed for facilities responsible for cleaning cables, wires, catheters, etc. in order to vacuum off unwanted particles such as chips, dust, talcum or any other microparticles.
Especially when working at coaxial wires and high-voltage cables (HV-cables), that is, when cutting and separating the wire meshes, there come off small and very tiny chips which have by all means to be avoided since they may cause malfunction in the subsequent processing procedures.
The handling of these cleaning devices is very simple: Insert the cable and the suction is activated (or, in case of foot valve: activate suction).
The BERI.CO.CLEAN version has been equipped with a touch-display, with which the suction-duration and the mode (sensor or foot valve) can be selected. You may use suction nozzles of different diameter, as well as different filters.
The machines have been designed for wires with an external diameter of ca. Ø 19,0 mm.
They permit operating on wires up to ca. 270 mm length. Custom sizes are available on request.
– Defined air flow in a closed system
– Generated particles are filtered and stored safely and without harm to the environment
– Robust industrial construction
Specifications
The electro-pneumatic BERI.CO.CLEAN devices have been designed for facilities responsible for cleaning cables, wires, catheters, etc. in order to vacuum off unwanted particles such as chips, dust, talcum or any other microparticles.
Especially when working at coaxial wires and high-voltage cables (HV-cables), that is, when cutting and separating the wire meshes, there come off small and very tiny chips which have by all means to be avoided since they may cause malfunction in the subsequent processing procedures.
The handling of these cleaning devices is very simple: Insert the cable and the suction is activated (or, in case of foot valve: activate suction).
The BERI.CO.CLEAN version has been equipped with a touch-display, with which the suction-duration and the mode (sensor or foot valve) can be selected. You may use suction nozzles of different diameter, as well as different filters.
The machines have been designed for wires with an external diameter of ca. Ø 19,0 mm.
They permit operating on wires up to ca. 270 mm length. Custom sizes are available on request.
– Defined air flow in a closed system
– Generated particles are filtered and stored safely and without harm to the environment
– Robust industrial construction