Komax - Fully Automatic Wire Processing Machine Alpha 560
KMX-0382000
The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides.
Komax - Fully Automatic Wire Processing Machine Alpha 560
KMX-0382000
The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides.
Contactez-nous
Besoin d'assistance, d'installation et/ou de formation ?
Appelez-nous +32 (0)14 42 44 01 ou contactez nous
Nick Janssen
Product specialist
Description
The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides. (*) Very hard or tough cables may not be processable although within specification. Komax offers feasibility tests for prior testing. Processing of larger conductor cross-sections possible on request. Two stations each process wires with cross sections of 2.5 to 16 mm² , crimp terminals up to 55mm and seals with a maximum length of 21mm. The Alpha 560 can be easily operated with the innovative HMI control and can also be controlled intuitively with minimal training. With a crimp force of 50 kN and fully integrated crimp force monitoring (CFA+/CFA), even demanding terminals can be assembled with the lowest possible waste rates. Up to 380 different seal variants are processed thanks to intelligent seal detection and the saved SST (Smart Seal Track) parameters. The wear-free, optical quality monitoring Q1250 monitors the strip quality and seal insertion during the process and sorts out faulty products fully automatically. – High-presicion crimping process thanks to 50 kN crimp force – Efficient belt drive with 12m/s speed – Simple operation thanks to clearly structured processes in het Komax HMI – Two different blade radii thanks to the dual head double blade holder
Specifications
| Wire cross-sections | 2.5 – 16 mm² (AWG 14 – 6)* |
| Wire outer diameter | 3 – 8.5 mm |
| Length range | 60 - 8.000 mm (Repeating accuracy ± (0.2% + 1 mm)) / 12 m upon request |
| Full strip max. | 29.5 mm |
| Partial strip | max. 35 mm |
| Crimp force* 1 – 50 kN (224 – 11’240 lbf.) | |
| Process module side 1/2 2 / 2 | |
| Noise level < 80 dB (without crimp tool) | |
| Electrical connection 3 × 208 – 480 V / 50 – 60 Hz / 5.6 kVA | |
| Compressed air connection 5 – 8 bar (73 – 116 psi.) | |
| Air consumption Crimp / Crimp | < 7 m³/h |
| Air consumption Crimp-Seal / Crimp-Seal | < 11 m³/h |
| Weight (incl. 2 crimp modules) | 1.400 kg |
The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides. (*) Very hard or tough cables may not be processable although within specification. Komax offers feasibility tests for prior testing. Processing of larger conductor cross-sections possible on request. Two stations each process wires with cross sections of 2.5 to 16 mm² , crimp terminals up to 55mm and seals with a maximum length of 21mm. The Alpha 560 can be easily operated with the innovative HMI control and can also be controlled intuitively with minimal training. With a crimp force of 50 kN and fully integrated crimp force monitoring (CFA+/CFA), even demanding terminals can be assembled with the lowest possible waste rates. Up to 380 different seal variants are processed thanks to intelligent seal detection and the saved SST (Smart Seal Track) parameters. The wear-free, optical quality monitoring Q1250 monitors the strip quality and seal insertion during the process and sorts out faulty products fully automatically. – High-presicion crimping process thanks to 50 kN crimp force – Efficient belt drive with 12m/s speed – Simple operation thanks to clearly structured processes in het Komax HMI – Two different blade radii thanks to the dual head double blade holder
| Type | Crimp To Crimp |
|---|---|
| Max cross section (mm²) | 16 |
