Komax - Twister BT 188 T
KMX-0089000
The BT 188 T semi-automatic cable processing machine twists up to four wires and the wire ends can also be automatically fixed with tape in an optional step.
Komax - Twister BT 188 T
KMX-0089000
The BT 188 T semi-automatic cable processing machine twists up to four wires and the wire ends can also be automatically fixed with tape in an optional step.
Contactez-nous
Besoin d'assistance, d'installation et/ou de formation ?
Appelez-nous +32 (0)14 42 44 01 ou contactez nous
Nick Janssen
Product specialist
Description
The BT 188 T semi-automatic cable processing machine twists up to four wires and the wire ends can also be automatically fixed with tape in an optional step. The BT 188 T offers excellent quality at high speeds of up to 350 pieces per hour in single twisting. The twisted end and lay length, wire cross section, wire outer diameter and open ends can be varied depending on requirements. The required cutting length is calculated automatically.
The BT 188 T therefore offers economical twisting with short set-up and changeover times. The integrable multi-twisting unit processes three or four wires in a single process step and features uniform lay lengths and high reproducibility. The optional spot taping unit is only available for the BT 188 T. The twisted wires are protected against untwisting with spot tape made of fabric or PVC tape.
- Intuitive user interface with TopTouch for easy operation
- Outstanding twisting performance for high demands
- Optional multiple twisting for precies impact formation
- Optional fully automatic spot taping unit exclusively on the BT 188 T
Specifications
| Wire length, untwisted with extensions | max. ca. 200 – 11.300 mm |
| Wire cross section | min. 2 × 0.08 mm² - max. 2 × 4.0 mm² |
| Open wire ends on twisting side | min. 25 mm - max. 85 mm |
| Open wire ends on holding side | min. 25 mm - max. 190 mm |
| End length of twisted wires | min. 200 mm - max. 2.300 mm |
| Lay length | min. 8 ± 5 mm - max. 50 ± 5 mm |
| Compressed-air connection | 4 – 6 bar |
| Weight | approx. 95 kg |
| Dimensions (L x W x H) | 3.700 x 850 x 1.280 mm |
Downloads
The BT 188 T semi-automatic cable processing machine twists up to four wires and the wire ends can also be automatically fixed with tape in an optional step. The BT 188 T offers excellent quality at high speeds of up to 350 pieces per hour in single twisting. The twisted end and lay length, wire cross section, wire outer diameter and open ends can be varied depending on requirements. The required cutting length is calculated automatically.
The BT 188 T therefore offers economical twisting with short set-up and changeover times. The integrable multi-twisting unit processes three or four wires in a single process step and features uniform lay lengths and high reproducibility. The optional spot taping unit is only available for the BT 188 T. The twisted wires are protected against untwisting with spot tape made of fabric or PVC tape.
- Intuitive user interface with TopTouch for easy operation
- Outstanding twisting performance for high demands
- Optional multiple twisting for precies impact formation
- Optional fully automatic spot taping unit exclusively on the BT 188 T
| Type | Twisters |
|---|
