Giebler - Mixing and dispensing system ROBO-DOS
MDS-f393acb0
The three-axis coordinate table ROBO-DOS, together with the mixing and dosing system 2-K-DOS T, results in a robot system for the fully automatic encapsulation of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings.
Giebler - Mixing and dispensing system ROBO-DOS
MDS-f393acb0
The three-axis coordinate table ROBO-DOS, together with the mixing and dosing system 2-K-DOS T, results in a robot system for the fully automatic encapsulation of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings.
Contactez-nous
Besoin d'un devis, d'une installation ou d'une formation ?
Call +32 (0)14 42 44 01 or contactez nous
Nick Janssen
Product specialist
Description
The three-axis coordinate table ROBO-DOS, together with the mixing and dosing system 2-K-DOS T, results in a robot system for the fully automatic encapsulation of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings. Parts can be cast at one point or with a track. They can be arranged several times on a pallet and then automatically poured one after the other by the device.
Operation is menu-driven with a touch panel and password-protected. The cast traces of parts can be programmed and saved. With additional devices, the drive and the amount of shots can be monitored.
Specifications
| Travel | Depending on device variant in sizes from 40 × 30 to 100 x 60 cm (more on request) |
| External dimensions (W x L x H) | 73 x 58 x XX cm up to 133 x 880 x XX cm |
| Passage height | 115 mm (more if required) |
| Max. travel speed | 50 mm/s |
| Work table height | 85 mm |
| Max. positioning error | 0.2 mm |
| Repeatability | 0.1 mm |
| Mains voltage | 94 - 264 VAC, 50-60 Hz |
| Power consumption | 150VA |
| Test mark | CE |
The three-axis coordinate table ROBO-DOS, together with the mixing and dosing system 2-K-DOS T, results in a robot system for the fully automatic encapsulation of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings. Parts can be cast at one point or with a track. They can be arranged several times on a pallet and then automatically poured one after the other by the device.
Operation is menu-driven with a touch panel and password-protected. The cast traces of parts can be programmed and saved. With additional devices, the drive and the amount of shots can be monitored.
