Komax - Wire Assembly Machine Omega 755
KMX-0455000
In contrast to the Omega 740/750, the Omega 755 machines are equipped with a fully automatic conveyor system for depositing the wire harnesses.
Komax - Wire Assembly Machine Omega 755
KMX-0455000
In contrast to the Omega 740/750, the Omega 755 machines are equipped with a fully automatic conveyor system for depositing the wire harnesses.
€442.258,43 / STK - 2 - 6 semaines
Besoin d'un devis, d'une installation ou d'une formation ?
Call +32 (0)14 42 44 01 or contactez nous
Nick Janssen
Product specialist
Description
In contrast to Omega 740/750, the Omega 755 machines are also equipped with a fully automatic conveyor system for depositing the wire harnesses. As with all models in the Omega series, automatic wire assembly can be individually adapted with the Omega 755. The machines differ only in the number of modules (eight module options for the Omega 755). Subsequent processes can also be integrated thanks to the conveyor system already available from the factory. Thanks to the elimination of manual steps and precise processing technology, these fully automatic wire processing machines are the answer to high demands, constantly evolving requirements and continuous miniaturization. This ensures long-term cost-effectiveness and quality independent of the operator. – Additional functions such as automatic secondary locking – Uninterrupted production thanks to flexible housing track system – Monitoring of the insertion process using force sensors – Careful interim storage of wire harnesses before further production
Specifications
| Piece output, single-sided and double-sided loading | 1.8 sec per insertion sequence (*) |
| Shortest wire length for single-sided loading | 240 mm |
| Shortest wire length for double-sided jumper connections | 300 – 560 mm (**) |
| Shortest wire length for complex loading | 300 – 780 mm (**) |
| Strip length | up to 25 mm |
| Wire cross-sections | 0.13 – 2.5 mm² (AWG 26 - 14) (***) |
| Outer wire diameter | Max. 4 mm |
| Usable transfer length | 2880 mm, up to eight C1370 crimp modules |
| Usable transfer length extension | 1840 mm up to five additional C1370 crimp modules |
| Wire changer | Max. 36 wires (in increments of six wires) |
| Wire end storage | Rotary storage unit with a maximum of 30 storage spaces |
| Process monitoring (integrated) | Collision monitoring (block chambers), insertion force monitoring, terminal locking monitoring |
| Block feed | Fully automatic block feed by spiral or linear conveyor |
| Maximum width of 1st and 2nd connector housing | 100 mm |
| Maximum width of 3rd and 4th connector housing | 60 mm |
| Pallet system loading area | (W×H) 280 × 200 mm |
| Electrical connection | 3 × 208 – 480 V, 50/60 Hz/10 VA |
| Compressed air connection | 6 bar |
| Air usage | 22 m³/h |
In contrast to Omega 740/750, the Omega 755 machines are also equipped with a fully automatic conveyor system for depositing the wire harnesses. As with all models in the Omega series, automatic wire assembly can be individually adapted with the Omega 755. The machines differ only in the number of modules (eight module options for the Omega 755). Subsequent processes can also be integrated thanks to the conveyor system already available from the factory. Thanks to the elimination of manual steps and precise processing technology, these fully automatic wire processing machines are the answer to high demands, constantly evolving requirements and continuous miniaturization. This ensures long-term cost-effectiveness and quality independent of the operator. – Additional functions such as automatic secondary locking – Uninterrupted production thanks to flexible housing track system – Monitoring of the insertion process using force sensors – Careful interim storage of wire harnesses before further production
| Type | With Wire Insertion |
|---|---|
| Max cross section (mm²) | 2.5 |
