Stripping Crimping Machine Delta 220
CS-47dc4361
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Stripping Crimping Machine Delta 220
CS-47dc4361
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
Contact us
Nick Janssen
Product specialist
Description
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
The Delta 220 semi-automatic crimping machine with manual crimp height adjustment offers highly exact repeatability and process quality thanks to the precise mechanics. CFA/CFA+ crimp force monitoring reliably detects missing strands, incorrect wires or insulation in the wire crimp. With the Delta 200 series, the cable is not moved during the work process – an advantage for pre-assembled cables. The graphical user interface enables intuitive operation with context-sensitive help, language selection and user rights. Thanks to programming, the settings are reproducible and operator input is minimized. The storage space has been increased to up to 5,000 articles. The Delta 220 is also optionally equipped with a stripping unit, bad contact cutter and suction unit.
QCENTER SOFTWARE
The QCenter software integrates the crimp height and pull-out force measurement devices into the production process and only releases production if the target and actual values match.
With QCenter, costly production errors are avoided because manual data entry is no longer necessary and production only starts when the measured values are within the required tolerances. Thanks to a simple identification function and the optional integration of a barcode scanner, measurement devices for checking crimp heights and pull-out force, such as Komax 341 or Q1210, can be used together on up to 20 crimpers. The measurement data can be transferred to an MES (Manufacturing Execution System) in real time via the MIKO interface, where it can be stored and evaluated. Alternatively, Komax Print is available, with the help of which a measurement report is automatically generated during production release and saved locally.
Specifications
| Cross-section range | 0.03 – 6.6 mm² (AWG 32 – 9) |
| Storage | 5000 articles, 1000 wires, 500 terminals |
| Max. crimp force | 20 kN |
| Stroke | 10 - 40 mm |
| Shut height | standard 135.8 mm / on request 118.3 - 174.8 mm |
| Stroke repeat accuracy | 0.012 mm |
| Crimp height adjustment | applicator |
| Split cycle for closed terminals | 1 - 20 mm |
| Strip length | 0.1 - 13 mm |
| Cycle time | crimp < 0.8 s, strip + crimp < 1.8 s |
| Electrical connection | 1 × 230 VAC, 50/60 Hz, 180 – 260 V, 1 × 115 VAC, 60 Hz, 92-130 V, 2000 VA |
| Compressed-air connection | 4 – 6 bar |
| Dimensions (WxHxD) | 700 x 750 x 500 mm |
| Weight | approx. 110 kg |
The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.
The Delta 220 semi-automatic crimping machine with manual crimp height adjustment offers highly exact repeatability and process quality thanks to the precise mechanics. CFA/CFA+ crimp force monitoring reliably detects missing strands, incorrect wires or insulation in the wire crimp. With the Delta 200 series, the cable is not moved during the work process – an advantage for pre-assembled cables. The graphical user interface enables intuitive operation with context-sensitive help, language selection and user rights. Thanks to programming, the settings are reproducible and operator input is minimized. The storage space has been increased to up to 5,000 articles. The Delta 220 is also optionally equipped with a stripping unit, bad contact cutter and suction unit.
QCENTER SOFTWARE
The QCenter software integrates the crimp height and pull-out force measurement devices into the production process and only releases production if the target and actual values match.
With QCenter, costly production errors are avoided because manual data entry is no longer necessary and production only starts when the measured values are within the required tolerances. Thanks to a simple identification function and the optional integration of a barcode scanner, measurement devices for checking crimp heights and pull-out force, such as Komax 341 or Q1210, can be used together on up to 20 crimpers. The measurement data can be transferred to an MES (Manufacturing Execution System) in real time via the MIKO interface, where it can be stored and evaluated. Alternatively, Komax Print is available, with the help of which a measurement report is automatically generated during production release and saved locally.
| Type | Applicator Based Crimping |
|---|
