• Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience
  • Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience

Showing 193–240 of 314 results

  • Ramatech – Cable Coiler KRI 850 C

    Het volautomatische kabeloprolsysteem voor kabels met een max. diameter van 35 mm en spoelen van max. 80 kg.

  • Ramatech – Cable Coiler KRI 850 CB

    Het volautomatische kabeloprolsysteem voor kabels met een max. diameter van 35 mm en spoelen van max. ca. 80 kg.

  • Ramatech – Cable Coiler KRI 850 CBP

    Het volautomatische kabeloprolsysteem voor kabels met een maximum diameter van 35 mm en spoelen van maximum 80 kg (ca. 20 kg in de automatische modus).

  • Restyling Pneumatic Applicator

    The Restyling pneumatic applicator is a mini applicator for linked terminals

  • Restyling Wire Applicator

    The Restyling mechanical-feed applicator crimps on-reel terminals over wires of different sections.

  • Rittmeyer – AM Strip 1

    Pneumatische stripmachine voor kabels tot 15mm.

  • Rittmeyer – AM STRIP 2/35

    Pneumatische stripmachine voor kabels tot 35 mm.

  • Rittmeyer – Beri Strip It

    Elektrische stripmachine voor kabels tot 5 mm.

  • Rittmeyer – Cable Cleaning Device BERI.CO.CLEAN

    Kabelreinigingsapparaat

  • Rittmeyer – Coax Shielding Cutting Device BERI.CO.CUT

    Coax afscherming snijmachine

  • Rittmeyer – Shield and Braiding Cutting Device BERI.CO.CUT V3

    Afscherming- en Vlechtsnijmachine

  • Rometsch – Autocut E-basic

    Elektronische snijmachine met rolaandrijving

  • Rometsch – M15-100

    Handmatig striptoestel voor kabels tot 15 mm.

  • Rometsch – WTM 1

    Kabelwikkelaar - WTM1 Ø 600 met afdekkap

  • Rometsch – WTM 2

    Kabelwikkelaar WTM 2-07

  • Scheugenpflug – DispensingCell

    Het systeem met drie assen heeft een foto-elektrische beveiliging en is uitgerust met het beproefde doseringssysteem Dos P016 en de cartridge-uitworp A90 C met vulpeilmonitoring.

  • Scheugenpflug – DispensingCell DC803

    De nieuwe en performante multifunctionele cel DispensingCell DC803 helpt je bij lastige doseringsoperaties.Deze cel is een verdere ontwikkeling van het beproefde celsysteem CNCell en is speciaal aangepast aan de vereisten voor industriële serieproducties die worden gekenmerkt door korte cycli en hoge stukaantallen. Dankzij het modulaire ontwerp en de verschillende opties is een flexibele configuratie mogelijk en kan de machine snel worden aangepast aan de procesvereisten en de batchgroottes.

  • Scheugenpflug – Dos Gear Pump Dispensers

    De systemen Dos GP zijn de eerste keuze voor het gieten van één niet-schurende, ongevulde component met een hoge viscositeit. Deze systemen zijn bijvoorbeeld ideaal voor het maken van doorlopende rupsen. Het systeem zorgt voor een doorlopende en regelmatige dosering.

  • Scheugenpflug – Vacuum Dispensing Systems

    De vacuümdoseringssystemen (VDS) van Scheugenpflug zijn ontworpen om op een economische manier batches van een hoog kwaliteitsniveau te gieten.Alle VDS-systemen zijn uitgerust met een doseereenheid voor het gieten van een of twee componenten.

  • Schunk Minic 3

    With the Minic-III we offer the most modern, fastest as well as most user-friendly and low-maintenance ultrasonic welding machine on the world market today.

  • Seal module S1441

    With the S1441 seal module, the insertion of industry-standard seals and mini seals has been significantly increased in terms of processing speed, stability and quality.

  • Semi-Automatic Modular Machine TM4000

    The TM4000 is a modular machine platform that fills the gap between standardized wire processing machines for individual processing steps and fully automatic production systems specially designed for one specific cable assembly.

  • Spot Taping KTB 50 E Plus

    Electric Bundling Machine

  • Steel Rail Cutter RC 300

    Mobile device that cuts mounting rails to length, fast.

  • Stripper-Crimper AM 02 C

    The AM 02 C ("Compact") is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules in the range of 0,14 mm² to 0,34 mm² (AWG 26 - 22).

  • Stripper-Crimper AM 02 CK Universal

    The AM 02 CK universal is additionally equipped with the crimp force analyzer CK 01, compared to the well-known AM 02 universal

  • Stripper-Crimper AM 02 Universal

    The AM 02 universal is an electropneumatic, universal stripper-crimper, for rapid and reliable processing of loose insulated Z+F ferrules from 0.5 mm² to 2.5 mm²

  • Stripper-Crimper AM 02.1

    The AM 02.1 is an electropneumatic modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range from 0,25 mm² to 2,5 mm² (AWG 24 - 14)

  • Stripper-Crimper AM 02.1 C

    The AM 02.1 C ("Compact") is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range of 0,14 mm² to 0,75 mm² (AWG 26 - 18).

  • Stripper-Crimper AM 03

    The AM 03 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose male and female contacts in the range from 0,08 up to 2,5 mm²

  • Stripper-Crimper AM 03 C

    The AM 03 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of small, loose male and female contacts and for small cross-sections in the range from 0,14 up to 0,5 mm².

  • Stripper-Crimper AM 03 Universal

    The stripper-crimper AM 03 universal is an electropnaumatic driven machine for rapid and reliable processing of loose male and female contacts in the range from 0,14 up to 2,5 mm².

  • Stripper-Crimper AM 04

    The AM 04 is an eletropneumatic modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules in the frange from 4 mm² to 10 mm².

  • Stripper-Crimper AM 04 Duomatic

    The AM 04 is an electropneumatically driven, modular stripper crimper for the efficient processing of loose, insulated Z+F ferrules in the range of 4 mm² to 10 mm²

  • Stripper-Crimper AM 04.1

    The AM 04.1 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range from 4 up to 10 mm²

  • Stripper-Crimper AM 05

    The stripper-crimper AM 05 is an electropneumatic driven machine for rapid and reliable processing of loose male and female contacts in the range from 0,25 up to 4 mm²

  • Stripper-Crimper EVOCRIMP

    The Z+F EVOCRIMP is an electric stripper-crimper for insulated ferrules in the range of 0.5 mm² up to 2.5 mm²

  • Stripper-Crimper UNIC-G

    The UNIC-G is an electropneumatic stripper-crimper which allows the processing of Z+F ferrules in the range of 0.5 mm² to 2.5 mm².

  • Stripper-Crimper UNIC-GV

    The UNIC-GV is an electropneumatic benchtop stripper-crimper, which allows the processing of five ferrules on reel with different cross section in the range of 0.5 mm² to 2.5 mm².

  • Stripper-Crimper UNIC-L

    The UNIC-L is an electropneumatic driven stripper-crimper for processing of loose insulated Z+F ferrules in the range of 0.5 mm² up to 2.5 mm² (AWG 20 - 14)

  • Stripper-Crimper UNIC-LS

    The UNIC-LS is an electropneumatic driven stripper-crimper for processing of loose insulated Z+F ferrules in the range of 0.5 mm² up to 2.5 mm² (AWG 20 - 14)

  • Stripper-Crimper UNIC-LZ

    The universal UNIC-LZ is an electropneumatic stripper-crimper for processing of loose Z+F twin ferrules in the range of 2 x 0.5mm2  to 2 x 1.5 mm2 (AWG 2 x 20 – 2 x 16).

  • Stripping Crimping Machine Delta 220

    The basic Delta 220 model is a programmable crimping machine with crimp force monitoring and manual crimp height adjustment – optionally with stripping unit and bad contact cutter.

  • Stripping Crimping Machine Delta 240

    The Delta 240 semi-automatic crimping machine with crimp force monitoring offers automatic crimp height adjustment and stripping unit – optionally with bad contact cutter.

  • Stripping Crimping Machine Delta 260

    The programmable Delta 260 can place a seal, strip the wire and crimp a terminal in one cycle. It offers crimp force monitoring, automatic crimp height adjustment and a bad contact cutter.

  • Stripping Crimping Machine MC 25

    The MC 25 processes insulated wire-end ferrules in strips.

  • Stripping Crimping Machine MC 40-1

    The electro-pneumatic stripping and crimping machine MC 40-1 reliably processes loose wire-end ferrules with plastic collars

  • Stripping Crimping Machine MC 40-L

    The electro-pneumatic stripping and crimping machine MC 40-L reliably processes loose wire-end ferrules with plastic collars