• Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience
  • Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience

Filter products

Showing 1–48 of 156 results

  • Benchtop Crimping Press BT-SC

    The BT-SC is a highly flexible and accurate BenchTop stripping and crimping platform. This semi-automatic machine meets all requirements for premium wire processing (*).

  • Crimp module C1340

    The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

  • Crimp module C1360

    In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.

  • Crimp module C1380

    The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².

  • Crimp module CM 04

    Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules, in the range of 0.5 to 10 mm², integrated in fully automatic machines

  • Crimp module CM03 MIL

    The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals.

  • Crimping Machine PCM

    The pneumatic driven crimper is specifically desig­ned to crimp loose turned contacts in the range of 0.08 up to 4 mm² (AWG 28 – 12).

  • Crimping Press P040

    The P040 Crimping Press is a semi-automatic press and is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration.

  • Crimping Press P107C

    The P107C Crimping Press is a semi-automatic press and is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration

  • Cutting Machine SG400 Touch

    The SG400 cutters have been specially developed for the requirements for cutting large-format cables or cross sections up to 120 mm².

  • Cutting Machine SG400 V Touch

    The SG400 V cutters have been specially developed for the requirements for cutting large-format cables or cross sections up to 200 mm².

  • Data Wire Lambda 2

    The Lambda 2 series is individually configured to ensure high-quality, semi-automatic processing of both HSD and FAKRA braided shields.

  • Data Wire Lambda 240

    The Lambda 240 processes smaller quantities of various types of high-voltage wires. Quick changeover time allows for easy product changeovers and ensures flexibility.

  • Data Wire Lambda 4

    The Lambda 4 series is a modular machine base for fully automatic assembly of multi-step contact systems with manual insertion and deposit.

  • Data Wire Lambda 440

    The Lambda 440 enables automated parallel processing of high-voltage cables for high-quality production of higher quantities of the same connector family.

  • Data Wire Lambda 6

    The Lambda 6 series is a machine base for fully automatic two-sided assembly of multi-step contact systems with manual insertion and removal.

  • Data Wire Lambda X

    The Lambda X series is a fully modular and highly flexible machine platform for semi-automatic or fully-automatic processing of complex connector systems.

  • DLW

    The DLW software supports qualified personnel in preparing production data for automated prefabrication of wires in a practical and efficient manner, even from batch size 1.

  • Electric Crimping Machine UP 15

    With the UP 15 electric dekstop crimping machine, you can process a wide variety of individual connectors quickly and safely.

  • Electric Stripping Machine BERI.STRIP.IT

    This new electric stripping machine, for cables with an outer diameter up to 5.0 mm, is characterized by extremely short cycle times and a very user-friendly menu navigation.

  • Electric Wire Stripper Mira 32

    The Mira 32 wire stripper is the ideal entry-level model for the semi-automated wire processing of wires up to an outer diameter of 4 mm and a strip length of 25 mm.

  • Electrical Stripping Machine AI 02

    The AI 02 is a stripping machine driven by an electric motor for stripping of wires from 0,05 up to 2,5 mm².

  • Electrical Stripping Machine AI 03

    The AI 03 is a stripping machine driven by an electric motor for stripping of wires from 0,5 up to 6 mm².

  • Electrical Stripping Machine AI 04

    The AI 04 is a stripping machine driven by an electric motor for stripping of wires from 2,5 up to 16 mm².

  • Electro-pneumatic Stripping Machine AB 01 Universal

    The dismantling machine AB 01 Universal is an electropneumatic driven machine for wires from 3,5 up to 11,9 mm

  • Electro-pneumatic Stripping Machine AM.ALL.ROUND

    With the semi-automatic stripping machine AM.ALL.ROUND equipped with rotating blades, one can easily, comfortably and safely undertake high precise stripping works on single strands and cables

  • Electropneumatic Benchtop Crimper SC 05 universal

    The SC 05 universal is an electropneumatic benchtop crimper, equipped with a very efficient electropneumatic drive.

  • Electropneumatic Benchtop Crimper-LS

    The Crimper-LS is an electropneumatic and flexible benchtop crimper for loose insulated Z+F ferrules in the cross-section range from 0.5 – 2.5 mm² (AWG 20 – 14) and crimping length from 6 – 12 mm.

  • Evolution Wire Applicator

    The Evolution applicator : a brand new mini applicator line offering the same quality level and reliability over the time of all Mecal’s products.

  • Ferrule module AEH-LS

    The AEH-LS ferrule module crimps loose ferrules on pre-stripped wires. The wire is easily inserted and a sensor monitors the presence of a ferrule.

  • Fluxing/tinning module X1585

    The X1585 fluxing/tinning module applies tin to strand ends precisely, reliably and lead-free. A wide range of applications is covered thanks to various tin nozzles.

  • Fully Automatic Twisted Wire Processing Sigma 688

    The Sigma 688 offers reliable and fully automatic production of twisted wires at speeds of up to 5m/s with reliable OEM quality.

  • Fully Automatic Twisted Wire Processing Sigma 688 T

    The fully automatic Sigma 688 ST not only twists precise wires, but also automatically fixes both wire ends in the same process step for transport and further processing.

  • Hose Cutting Machine SSM60 Touch

    The hose cutting machine SSM60 T is suitable to cut closed and slitted corrugated tube, PVC, rubber hose as well as further types of hoses with an outer diameter of up to 60 mm

  • Hydraulic Crimping Machine UP 150

    With a crimping force of 150 kN, the UP 150 is particulary suitable for processing large cross-sectional areas such as battery cables.

  • Hydraulic Crimping Machine UP 65

    The UP 65 hydraulic table top crimping machine makes the single terminal processing possibilities almost unlimited.

  • Hydraulic Crimping Machine UP 66

    Stable working process, 150 kN crimping force and a cycle time tailored to your requirements, with our hydraulic crimping machine UP 66 you can produce the most different high-voltage cable harnesses uncomplicated, precise and economical.

  • Laser Stripper ilc 20/8 BT

    Premium stripping quality

  • Laser Stripper ilc 20/8 BTS

    Premium stripping quality

  • Laser Stripper ilc 30/20 BTS

    Premium stripping quality

  • Laser Stripper Sylade 7

    The best alternative to thermal or chemical stripping

  • Laser Stripper Sylade 7H

    The handheld solution for laser wire stripping

  • Manual Cable Stripper M 10/170

    The manual operated cable insulation remover type M 10/170 for cables up to 10 mm, is used in the electrician`s workshop or in the cable pre-assembly industry, when the insulation of the cable has to be removed quickly.

  • Manual Cable Stripper M 15/100

    The manual operated cable insulation remover type M 15/100 for cables up to 15 mm, is used in the electrician`s workshop or in the cable pre-assembly industrie, when the insulation of cables has to be removed quickly.

  • Manual Cable Stripper M 30/150

    The manual operated cable insulation remover type M 30/150 for cables up to 30 mm, is used in the electrician`s workshop or in the cable pre-assembly industrie, when the insulation of cables has to be removed quickly.

  • Pneumatic Crimper AC 100

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 100 T

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 25

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.