• Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience
  • Independent expertise
  • Customers give us a 9+
  • Extensive offer
  • More than 45 years of experience

Filter products

Showing all 18 results

  • Microlab 35

    The MicroLab 35 bench-top micrograph laboratory can reliably check large quantities of B crimps in the processing range of 0.5 to 3.0mm in serial quality testing.

  • Microlab 55

    The MicroLab 55 is a stand-alone micrograph laboratory for all types of crimping available on the market for both cross sections and longitudinal sections with a width of 0.5 to 30.0 mm.

  • Precision measuring device Q1210

    The Q1210 precision measuring module for wire processing machines measures pull-out forces of 20 to 1000 N with a pull-out speed of up to 200mm / min.

  • Precision measuring device Q2205

    As a module in a wire processing machine, the Q2205 measurement device measures with a defined pull-out speed of 25 or 50mm/min the pull-out forces of 20 to 500 N.

  • Pull Tester PT 10K

    The Pull Tester PT10K is designed to make tensile tests with large crimp cross sections.

  • Pull-off force measuring device Komax 332

    The pull-off force measuring device Komax 332 is suited for operation on fully automatic crimping machine as well as for standalone operation on a central measuring place.

  • Spark tester Q1140

    The Q1140 high-voltage spark tester for fully automatic wire processing machines checks wire insulation for the smallest needle holes and microscopic cracks.

  • Test module Q1250

    As a basic version, the scalable Q1250 module offers testing of the stripping as well as the crimp and seal. All quality features are comprehensively tested in the full package.

  • X-Y Gliding table

    Steady XY table for easy control of the magnified object. 

  • Measuring device MicroPull 10

    The MicroPull 10 is a standalone measurement system that measures pull-out forces ranging from 20 to 1000 N. 

  • Microheight 10

    The MicroHeight 10 crimp height measurement device verifies the quality of crimps either as a stand-alone device or integrated into certain Komax machines for quality verification.

  • Microlab 30

    The MicroLab 30 mobile micrograph laboratory creates micrographs for medium to large quantities of B-crimps, MIL-crimps and hex-crimps with a diameter of 0.5 to 10.0 mm.

  • Microscope camera

    Inspection camera

  • Crimp height measuring device Komax 341

    The Komax 341 crimp height measurement device measures terminals up to a height of 8 mm and compares them with the target crimp height.

  • Digital microscope Komax 345

    The high-quality, digital Komax 345 microscope enables the control of stripping and crimping quality, even with miniature terminals and the smallest wire cross sections.

  • Magnification system CMORE PLUS

    The CMORE PLUS magnification system from visus technology combines the fhd technology´s supremely sharp images and the microscopes ability to magnify.

  • Microlab 10

    The MicroLab 10 is a compact micrograph laboratory in a case system that measures and evaluates small quantities of B crimps in the 0.5 - 2.5mm processing range.

  • Pull Tester Q1210

    The Q1210 precision measuring module for wire processing machines measures pull-out forces of 20 to 1000 N with a pull-out speed of up to 200mm / min.