• Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring
  • Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring

Toont alle 12 resultaten

  • CAB – Hektor 2

    PCBs are separated carefully and quickly, off-cuts are removed precisely and smoothly. A two-part matrix enables the different blades to be assembled resp. exchanged easily.

  • CAB – Maestro 2 / 2M

    The compact MAESTRO 2 separates PCBs quickly and economically. Little footprint is required.

  • CAB – Maestro 3E

    The MAESTRO 3E separates both small and large PCBs. The support table and the rest can be set continuously to the best possible operational position.

  • CAB – Maestro 4S

    MAESTRO 4S separates both small and large PCBs quickly and economically without stress.

  • CAB – Maestro 5L

    It can be used economically when large quantities of milled PCBs have to be separated.

  • CAB – Maestro 6

    Separation of milled PCBs up to a length of 1,500 mm with a minimum of stress on the components

  • Dr.Storage – T60M-1200-6

    T60M-1200-6 Baking 60℃ Auto Dry Cabinet is a plug and play, fully auto dry cabinet which will be stable at 60℃ and ＜1%RH. It is especially designed for moisture sensitive SMD packages.

  • Dr.Storage – T60M-600

    T60M-600 Baking 60℃ Auto Dry Cabinet is a plug and play, fully auto dry cabinet which will be stable at 60℃ and ＜1%RH. It is especially designed for moisture sensitive SMD packages.

  • Dr.Storage – X2B-1200-6

    X2B lower then 5% Dry Cabinet

  • Dr.Storage – X2B-200

    X2B lower then 5% Dry Cabinet

  • Dr.Storage – X2B-400

    X2B lower then 5% Dry Cabinet

  • Dr.Storage – X2B-600

    X2B lower then 5% Dry Cabinet