• Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring
  • Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring

Resultaat 1–48 van de 159 resultaten wordt getoond

  • Benchtop Crimping Press BT-SC

    The BT-SC is a highly flexible and accurate BenchTop stripping and crimping platform. This semi-automatic machine meets all requirements for premium wire processing (*).

  • Crimp module C1340

    The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

  • Crimp module C1360

    In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.

  • Crimp module C1370

    The C1370 crimp module for fully automatic wire processing machines ensures low reject rates through the CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

  • Crimp module C1380

    The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².

  • Crimp module CM 04

    Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules, in the range of 0.5 to 10 mm², integrated in fully automatic machines

  • Crimp module CM03 MIL

    The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals.

  • Crimping Machine PCM

    The pneumatic driven crimper is specifically desig­ned to crimp loose turned contacts in the range of 0.08 up to 4 mm² (AWG 28 – 12).

  • Crimping Press P040

    The P040 Crimping Press is a semi-automatic press and is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration.

  • Crimping Press P107C

    The P107C Crimping Press is a semi-automatic press and is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration

  • Cut and Strip machine Kappa 310

    The Kappa 310 is a high-speed machine for high production performance when cutting and stripping wires with a conductor cross section of 0.02 mm² to 6 mm² (*).

  • Cut and Strip machine Kappa 315

    The Kappa 315 cutting and stripping machine processes wires with a cross section of 0.05 mm² to 10 mm² (*) thanks to the sturdy blade holder and various blade shapes.

  • Cut and Strip machine Kappa 320

    The Kappa 320 cutting and stripping machine combines the robust processing of wires up to 10 mm² with the wire processing speed of 4 m/s.

  • Cut and Strip machine Kappa 330DH

    The Kappa 330 cutting and stripping machine is suitable for processing a wide range of wires as a single head and optionally as a dual head with a double blade cutting head (*).

  • Cut and Strip machine Kappa 330SH

    The Kappa 330 cutting and stripping machine is suitable for processing a wide range of wires as a single head and optionally as a dual head with a double blade cutting head (*).

  • Cut and Strip machine Kappa 340

    The Kappa 340 handles the precise processing of uneven cable surfaces, battery, multicore, HV and sensor cables as well as hard, tough, thick and thin insulation (*).

  • Cut and Strip machine Kappa 340R

    The Kappa 340 handles the precise processing of uneven cable surfaces, battery, multicore, HV and sensor cables as well as hard, tough, thick and thin insulation (*).

  • Cut and Strip machine Kappa 350

    The Kappa 350 cutting and stripping machine processes round conductors up to 120 mm² and a maximum outer diameter of 35 mm in high quality thanks to sophisticated sensors (*).

  • Cutting Machine GlobalCut 100

    Automatic electric cutting machine with pre-determination of the pieces and resolution of the measures in millimeters

  • Cutting Machine SG400 Touch

    The SG400 cutters have been specially developed for the requirements for cutting large-format cables or cross sections up to 120 mm².

  • Cutting Machine SG400 V Touch

    The SG400 V cutters have been specially developed for the requirements for cutting large-format cables or cross sections up to 200 mm².

  • Data Wire Lambda 2

    The Lambda 2 series is individually configured to ensure high-quality, semi-automatic processing of both HSD and FAKRA braided shields.

  • Data Wire Lambda 240

    The Lambda 240 processes smaller quantities of various types of high-voltage wires. Quick changeover time allows for easy product changeovers and ensures flexibility.

  • Data Wire Lambda 4

    The Lambda 4 series is a modular machine base for fully automatic assembly of multi-step contact systems with manual insertion and deposit.

  • Data Wire Lambda 440

    The Lambda 440 enables automated parallel processing of high-voltage cables for high-quality production of higher quantities of the same connector family.

  • Data Wire Lambda 6

    The Lambda 6 series is a machine base for fully automatic two-sided assembly of multi-step contact systems with manual insertion and removal.

  • Data Wire Lambda X

    The Lambda X series is a fully modular and highly flexible machine platform for semi-automatic or fully-automatic processing of complex connector systems.

  • DLW

    The DLW software supports qualified personnel in preparing production data for automated prefabrication of wires in a practical and efficient manner, even from batch size 1.

  • Electric Crimping Machine UP 15

    With the UP 15 electric dekstop crimping machine, you can process a wide variety of individual connectors quickly and safely.

  • Electric Stripping Machine BERI.STRIP.IT

    This new electric stripping machine, for cables with an outer diameter up to 5.0 mm, is characterized by extremely short cycle times and a very user-friendly menu navigation.

  • Electric Wire Crimper EC 65

    The EC 65 electric crimper presses various types of contacts.

  • Electric Wire Stripper Mira 32

    The Mira 32 wire stripper is the ideal entry-level model for the semi-automated wire processing of wires up to an outer diameter of 4 mm and a strip length of 25 mm.

  • Electrical Stripping Machine AI 01

    The basic model AI 01 is a stripping machine driven by an electric motor for stripping of wires from 0,05 up to 6 mm².

  • Electrical Stripping Machine AI 02

    The AI 02 is a stripping machine driven by an electric motor for stripping of wires from 0,05 up to 2,5 mm².

  • Electrical Stripping Machine AI 03

    The AI 03 is a stripping machine driven by an electric motor for stripping of wires from 0,5 up to 6 mm².

  • Electrical Stripping Machine AI 04

    The AI 04 is a stripping machine driven by an electric motor for stripping of wires from 2,5 up to 16 mm².

  • Electro-pneumatic Stripping Machine AB 01 Universal

    The dismantling machine AB 01 Universal is an electropneumatic driven machine for wires from 3,5 up to 11,9 mm

  • Electro-pneumatic Stripping Machine AM.ALL.ROUND

    With the semi-automatic stripping machine AM.ALL.ROUND equipped with rotating blades, one can easily, comfortably and safely undertake high precise stripping works on single strands and cables

  • Electropneumatic Benchtop Crimper SC 05 universal

    The SC 05 universal is an electropneumatic benchtop crimper, equipped with a very efficient electropneumatic drive.

  • Electropneumatic Benchtop Crimper-G

    The Crimper-G is an electropneumatic, flexible benchtop crimper that processes Z+F ferrules on reel from 0.5 up to 2.5 mm2 (AWG 20 – 14).

  • Electropneumatic Benchtop Crimper-LS

    The Crimper-LS is an electropneumatic and flexible benchtop crimper for loose insulated Z+F ferrules in the cross-section range from 0.5 – 2.5 mm² (AWG 20 – 14) and crimping length from 6 – 12 mm.

  • EVOCUT + EVOFEED

    The electric cutting machine impresses with its compact build, quick processing times and flexible applications. Combined with the EVOFEED which provides up to 12 conductors, it is possible to sequentially process complex projects in a simple and effective way.

  • Evolution Wire Applicator

    The Evolution applicator : a brand new mini applicator line offering the same quality level and reliability over the time of all Mecal’s products.

  • Ferrule module AEH-LS

    The AEH-LS ferrule module crimps loose ferrules on pre-stripped wires. The wire is easily inserted and a sensor monitors the presence of a ferrule.

  • Ferrule module CM 04 DUO

    The sequenceable ferrule module CM04 Duo crimps up to two loose ferrules with large cross-sections of 4 and 6 mm² on pre-stripped wires with a Quadro crimp design.

  • Ferrule module CM 1/5 GS

    With the ferrule module CM 1/5 GS, up to five different ferrules on strap in different lengths can be processed with a Quadro crimp design.

  • Ferrule module CM F20

    With the ferrule module CM F20, up to five different ferrules on strap can be processed sequentially with a trapezoidal crimp design.

  • Fluxing/tinning module X1585

    The X1585 fluxing/tinning module applies tin to strand ends precisely, reliably and lead-free. A wide range of applications is covered thanks to various tin nozzles.