Toont alle 11 resultaten

• 

  CAB – Hektor 2

  PCBs are separated carefully and quickly, off-cuts are removed precisely and smoothly. A two-part matrix enables the different blades to be assembled resp. exchanged easily.
• 

  CAB – Maestro 2 / 2M

  The compact MAESTRO 2 separates PCBs quickly and economically. Little footprint is required.
• 

  CAB – Maestro 3E

  The MAESTRO 3E separates both small and large PCBs. The support table and the rest can be set continuously to the best possible operational position.
• 

  CAB – Maestro 4S

  MAESTRO 4S separates both small and large PCBs quickly and economically without stress.
• 

  CAB – Maestro 5L

  It can be used economically when large quantities of milled PCBs have to be separated.
• 

  CAB – Maestro 6

  Separation of milled PCBs up to a length of 1,500 mm with a minimum of stress on the components
• 

  V-TEK – PC-250+ Manual Parts Counter

  The PC-250+ Manual Parts Counter is designed for counting devices in tape and reel, safely and quickly.
• 

  V-TEK – PT-55 Peel Force Tester

  V-TEK Peel Force Testers are built to test, confirm, and record proper sealing strength of cover tape to carrier tape.
• 

  V-TEK – TM-50 Manual Taping Machine

  Large, small, or difficult to place parts are easy to tape with V-TEK's TM-50.
• 

  V-TEK – TM-50XL Manual Taping Machine

  With all the features of the standard TM-50, the TM-50XL accepts tape widths up to 120mm and includes the software and sensor packages.
• 

  V-TEK – Versacount II

  The Versacount II+ is designed to provide a 100% accurate count—forward or backward.