The ISM5OO intelligent dynamic warehouse has been developed to satisfy the storage needs of the most varied types of components. With the possibility of configuring up to 640 different positions, in the ISM5OO intelligent static warehouse it is possible to insert 7 /13/15” reels, JEDEC trays, SMT and PTH tubes, screen-printing frames and foils, printed circuits, PTH components, etc… Equipped with three luminous LED signals per position, the dynamic warehouse will indicate the position of the components to be extracted and, by reading the code with a PDA scanner, will prevent the incorrect removal of components. For the inserting phase the operator will only have to read the code to be inserted and the system will suggest the position. However, the operator will still have the possibility of inserting the component in a different position of his own choice. This offers a dynamic management of the positions in order to exploit the space available so as to reach maximum capacity. The ISM5OO intelligent static warehouse is configured with the humidity control module*. It is thus possible to control and monitor humidity, to maintain an internal environment with a humidity of less than 5%.
Humidity Control Module With the Humidity Control Module, it is possible to adjust and monitor humidity, to maintain an internal environment below 5% RH. This way it will be possible to store properly all sensitive components. Thanks to the software interface, the humidity floor life of each component can be monitored in terms of humidity. ( RH<5%, Software unit to control MSL life of every component managed inside the ISM systems, 8 dehumidifiers, 4 sensors: internal/external RH and internal/external temperature, Display to show internal/external RH and temperature)
|Power||240 VAC / 50 Hz / 60 Hz|