• Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring
  • Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring

Toont alle 38 resultaten

  • Crimp module C1340

    The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

  • Crimp module C1360

    In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.

  • Crimp module C1370

    The C1370 crimp module for fully automatic wire processing machines ensures low reject rates through the CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.

  • Crimp module C1380

    The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².

  • Crimp module CM03 MIL

    The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals.

  • Electropneumatic Benchtop Crimper SC 05 universal

    The SC 05 universal is an electropneumatic benchtop crimper, equipped with a very efficient electropneumatic drive.

  • Electropneumatic Benchtop Crimper-LS

    The Crimper-LS is an electropneumatic and flexible benchtop crimper for loose insulated Z+F ferrules in the cross-section range from 0.5 – 2.5 mm² (AWG 20 – 14) and crimping length from 6 – 12 mm.

  • Fully Automatic Wire Processing Machine Alpha 530

    The fully automatic Alpha 530 wire processing machine for crimping and seal insertion on both sides meets high quality requirements for wire cross-sections of 0.13 – 6 mm² (*).

  • Fully Automatic Wire Processing Machine Alpha 550

    The Alpha 550 fully automatic wire processing machine ensures high unit cost performance with a wire cross-section of 0.13 – 6 mm² (*) and the best quality in crimping and seal insertion on both sides.

  • Fully Automatic Wire Processing Machine Alpha 560

    The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides.

  • Fully Automatic Wire Processing Machine Alpha 565

    The Alpha 565 wire processing machine is suitable for special processing with up to seven process stations and conductor cross-section 0.13 – 6 mm² (*)

  • Fully Automatic Wire Processing Machine Gamma 450

    Gamma 450 - the compact, fully automatic wire processing machine - processes crimps and seals on both sides with a wire cross section of 0.13 –4 mm² (*).

  • Pneumatic Crimper AC 100

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 100 T

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 25

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 25 SQ

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 25 SQ T

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 25 T

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 40

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Pneumatic Crimper AC 40 T

    The pneumatic crimping machines process wire-end ferrules quickly and efficiently.

  • Stripper-Crimper AM 02 C

    The AM 02 C ("Compact") is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules in the range of 0,14 mm² to 0,34 mm² (AWG 26 - 22).

  • Stripper-Crimper AM 02 CK Universal

    The AM 02 CK universal is additionally equipped with the crimp force analyzer CK 01, compared to the well-known AM 02 universal

  • Stripper-Crimper AM 02 Universal

    The AM 02 universal is an electropneumatic, universal stripper-crimper, for rapid and reliable processing of loose insulated Z+F ferrules from 0.5 mm² to 2.5 mm²

  • Stripper-Crimper AM 02.1

    The AM 02.1 is an electropneumatic modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range from 0,25 mm² to 2,5 mm² (AWG 24 - 14)

  • Stripper-Crimper AM 02.1 C

    The AM 02.1 C ("Compact") is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range of 0,14 mm² to 0,75 mm² (AWG 26 - 18).

  • Stripper-Crimper AM 04

    The AM 04 is an eletropneumatic modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules in the frange from 4 mm² to 10 mm².

  • Stripper-Crimper AM 04 Duomatic

    The AM 04 is an electropneumatically driven, modular stripper crimper for the efficient processing of loose, insulated Z+F ferrules in the range of 4 mm² to 10 mm²

  • Stripper-Crimper AM 04.1

    The AM 04.1 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules in the range from 4 up to 10 mm²

  • Stripper-Crimper EVOCRIMP

    The Z+F EVOCRIMP is an electric stripper-crimper for insulated ferrules in the range of 0.5 mm² up to 2.5 mm²

  • Stripper-Crimper UNIC-G

    The UNIC-G is an electropneumatic stripper-crimper which allows the processing of Z+F ferrules in the range of 0.5 mm² to 2.5 mm².

  • Stripper-Crimper UNIC-GV

    The UNIC-GV is an electropneumatic benchtop stripper-crimper, which allows the processing of five ferrules on reel with different cross section in the range of 0.5 mm² to 2.5 mm².

  • Stripper-Crimper UNIC-L

    The UNIC-L is an electropneumatic driven stripper-crimper for processing of loose insulated Z+F ferrules in the range of 0.5 mm² up to 2.5 mm² (AWG 20 - 14)

  • Stripper-Crimper UNIC-LS

    The UNIC-LS is an electropneumatic driven stripper-crimper for processing of loose insulated Z+F ferrules in the range of 0.5 mm² up to 2.5 mm² (AWG 20 - 14)

  • Stripper-Crimper UNIC-LZ

    The universal UNIC-LZ is an electropneumatic stripper-crimper for processing of loose Z+F twin ferrules in the range of 2 x 0.5mm2  to 2 x 1.5 mm2 (AWG 2 x 20 – 2 x 16).

  • Stripping Crimping Machine MC 25

    The MC 25 processes insulated wire-end ferrules in strips.

  • Stripping Crimping Machine MC 40-1

    The electro-pneumatic stripping and crimping machine MC 40-1 reliably processes loose wire-end ferrules with plastic collars

  • Stripping Crimping Machine MC 40-L

    The electro-pneumatic stripping and crimping machine MC 40-L reliably processes loose wire-end ferrules with plastic collars

  • Wire Crimper EVOPRESS

    The Z+F EVOPRESS is an electrically driven crimping press for processing a wide variety of electrical connectors such as Z+F ferrules and Z+F terminals. With its compact design it fits into the Z+F EVOLINE.