Toont alle 15 resultaten

• 

  Crimp module C1340

  The C1340 crimp module for fully automatic wire processing machines ensures low reject rates through CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.
• 

  Crimp module C1360

  In addition to efficiency and precision, the C1360 crimp module for Alpha and Gamma wire processing machines offers convenient automatic crimp height adjustment.
• 

  Crimp module C1370

  The C1370 crimp module for fully automatic wire processing machines ensures low reject rates through the CFA+/CFA crimp force monitoring and high productivity thanks to short changeover times.
• 

  Crimp module C1380

  The C1380 crimp module for the fully automatic Alpha 560 wire processing machine enables the crimping process for particularly wide wire cross sections from 2.5 to 16 mm².

• Crimp module CM 04

  Electropneumatic driven, easily adaptable crimpmodule for processing of loose Z+F ferrules, in the range of 0.5 to 10 mm², integrated in fully automatic machines

• Crimp module CM03 MIL

  The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals.
• 

  Ferrule module AEH-LS

  The AEH-LS ferrule module crimps loose ferrules on pre-stripped wires. The wire is easily inserted and a sensor monitors the presence of a ferrule.
• 

  Ferrule module CM 04 DUO

  The sequenceable ferrule module CM04 Duo crimps up to two loose ferrules with large cross-sections of 4 and 6 mm² on pre-stripped wires with a Quadro crimp design.
• 

  Ferrule module CM 1/5 GS

  With the ferrule module CM 1/5 GS, up to five different ferrules on strap in different lengths can be processed with a Quadro crimp design.
• 

  Ferrule module CM F20

  With the ferrule module CM F20, up to five different ferrules on strap can be processed sequentially with a trapezoidal crimp design.
• 

  Fully Automatic Wire Processing Machine Alpha 530

  The fully automatic Alpha 530 wire processing machine for crimping and seal insertion on both sides meets high quality requirements for wire cross-sections of 0.13 – 6 mm² (*).
• 

  Fully Automatic Wire Processing Machine Alpha 550

  The Alpha 550 fully automatic wire processing machine ensures high unit cost performance with a wire cross-section of 0.13 – 6 mm² (*) and the best quality in crimping and seal insertion on both sides.
• 

  Fully Automatic Wire Processing Machine Alpha 560

  The Alpha 560 fully automatic wire processing machine is suitable for loading large terminals or seals up to a conductor cross section of 16 mm² (*) on one or both sides.
• 

  Fully Automatic Wire Processing Machine Alpha 565

  The Alpha 565 wire processing machine is suitable for special processing with up to seven process stations and conductor cross-section 0.13 – 6 mm² (*)
• 

  Fully Automatic Wire Processing Machine Gamma 450

  Gamma 450 - the compact, fully automatic wire processing machine - processes crimps and seals on both sides with a wire cross section of 0.13 –4 mm² (*).