Beschrijving

Its dimensions also enable the assembly of largest projects. Apart from the mere PC board surface there is enough space for numerous trays. Up to 346 different feeding positions can be provided. The available depth also allows the integration of an inline-system in the front area of the machine as well as lateral feeding units. Even in case of an inline function, there are still 262 feeding positions available as well as space for several trays.

Range of applications
Assembling and dispensing of low and medium volume SMT up to 10500 (two heads) 6000 (4600 / IPC9850) components per hour.

Feeding units
Feeding of components from tape, stick, tape strip, tray and loose components.

Component capability
Chips 0201 up to Fine Pitch 70 × 70 mm and pitch 0.3 mm, BGAs, µBGAs, CSPs, QFNs and custom parts like connectors, wired THT-LEDs etc.

Bottom-Vision
The bottom vision is an image recognition which measures and analyses the components that are too large for the centering at the head.
The software for image recognition determines the exact assembling position and tests the BGAs of complete balls respectively that the FPs‘ wires aren‘t deformed. These components can be selected before processing. Used are components up to 0201, µBGAs, 0.3 mm Fine-Pitch or special components like for example connectors up to 70 x 70 mm.

smartFEEDER
smartFEEDER are intelligent feeders, that are equipped with a microprocessor control. Using a wireless barcode reader, reel- and feeder-barcode are programmed and saved in the software. The placeALL® Pick & Placer has now knowledge about the amount, type and position of the feeder. Thus changeover times between different projects are greatly reduced.

Automatic fiducial recognition
This extension recognizes the fiducials on a circuit board by itself. This is especially useful for a smartLINEsystem. The position correction is done using a dot, cross, rhomb etc. on the circuit board.
While assembling multi-boards, single circuit boards – which are marked by the producer – can be excluded.

Double head
According to the motto „grow with the times“, a second placement head and tool changer can be retrofitted to the placeALL®620, placeALL®620L and 610XL. This allows the placement speed to be increased up to 40 %. Compared to investing in a second machine the additional costs are just a fraction.

Inline – system
A classic production line can be built using our inline transport system. This includes chaining of reflow ovens, automatic Pick & Placers and transfer units like loaders. Controlling works acording to the SMEMA-Standard.
The inline system can be retrofitted to the machine at the customer’s site at any time.

Dispensers
Dispensing of solder paste or glue can be done with two different systems:

Time-pressure system
For dispensing big solder paste dots or glue

Microprocessor-controlled system
This system detects parameters like cartridge temperature, fill level etc. .By this Fine-Pitch components down to a pitch of 0.5 mm can be safely dispensed, the ideal solution for prototypes!

Specifications