• Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring
  • Onafhankelijke expertise
  • Klanten geven ons een 9+
  • Uitgebreid aanbod
  • Meer dan 45 jaar ervaring

Resultaat 289–336 van de 581 resultaten wordt getoond

  • Manual Taping Machine TM-50XL

    The TM-50XL manual taping machine

  • Measuring Board Reflow V5

    Measuring Board Reflow V5 – For plant process control

  • Measuring Board Selective V5

    Measuring Board Selective V5

  • Measuring Board VAPOURPHASE VP

    Measuring Board Reflow Vapourphase – For plant process control and profile optimization

  • Measuring Board Wave V6

    Measuring Board Wave V6 – For plant process control and profile optimization

  • Mixed-bed resin Refill pack 2x10l

  • Mixing and dispensing system 2-K-MICRO-DOS

    De 2-K-DOS doseer- en mengmachine mengt en doseert 2-componenten gietmassa's en lijmen op basis van polyurethaan, epoxy en siliconen snel en nauwkeurig in zeer kleine hoeveelheden, ongeveer 10 mg.

  • Mixing and dispensing system 2-K-MICRO-DOS

    The mixing and dosing device 2-K-MICRO-DOS quickly and precisely mixes and doses 2-component casting compounds and adhesives based on polyurethane, epoxy and silicone in very small quantities, around 10 mg.

  • Mixing and dispensing system 4-K-DOS adapter

    The 4-K adapter enables the interconnection of two 2-K-DOS mixing and dispensing devices, so that up to four components can be mixed in a static mixing pipe.

  • Mixing and dispensing system HOBBO-DOS

    The HOBBO-DOS is an additional device for the 2-K-DOS T mixing and dosing device, with which one or two components are conveyed from the containers standing on the floor – HOBBOCK – directly into the 2-K-DOS T or into their containers.

  • Mixing and dispensing system HOBBO-DOS

    De HOBBO-DOS is een aanvullend systeem voor de 2-K-DOS T meng- en doseermachine, waarmee één of twee componenten vanuit de op de vloer staande containers – HOBBOCK – rechtstreeks in de 2-K-DOS T of in hun containers worden geleid.

  • Mixing and dispensing system LOAD-DOS

    The LOAD-DOS is a station for automatically loading 2-component casting compounds from 200-liter (or similarly large) barrels into the containers of mixing and dispensing devices such as the 2-K-DOS.

  • Mixing and dispensing system LOAD-DOS

    LOAD-DOS is een laadstation waar automatisch tweecomponentengietmassa's afkomstig uit 200 l-vaten of andere gelijkaardige grote containers, in de reservoirs van de meng- en doseermachines, bijv. 2-K-DOS, worden gegoten.

  • Mixing and dispensing system ROBO-DOS

    The three-axis coordinate table ROBO-DOS, together with the mixing and dosing system 2-K-DOS T, results in a robot system for the fully automatic encapsulation of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings.

  • Mixing and dispensing system ROBO-DOS

    De drieassige coördinatentafel ROBO-DOS vormt samen met het meng- en doseersysteem 2-K-DOS T een gerobotiseerde installatie voor het volautomatisch gieten van modules en componenten zoals elektronische bouwgroepen, sensoren, waterdichte naden en coatings.

  • Mixing and dispensing system THERMO-DOS

    The THERMO-DOS is an add-on unit to heat up the casting compounds for the 2-K-DOS and 2-K-MiniDOS mixing and dispensing devices.

  • Mixing and dispensing system THERMO-DOS

    De THERMO-DOS is een aanvullend systeem om de gietmassa's voor de 2-K-DOS en 2-K-MiniDOS meng- en doseringsmachines op te warmen.

  • MonoCoat 255L (packing: tin 0,710kg)

    MonoCoat 255L (packing: tin 0,710kg)

  • MultiEx 3D-A3 Standard broadband DCB (also PCBA) cleaner 25l can

  • MultiEx 3D-E14 Readymix 25l can

  • MultiEx 3D-H2 Ideally applicable for assembled PCBAs and DCBs 25l can

  • MultiEx GC 25L Special screen cleaner for SMD adhesive 25l can

  • MultiEx N7-TS Regenerative aqueous stencil cleaning and rinsing detergent 1l bottle

  • MultiEx N7-TS Regenerative aqueous stencil cleaning and rinsing detergent 25l can

  • MultiEx VR-HPA Highend broadband cleaner for PCBAs with sensitive components 25l can

  • N2 Nitrogen Cabinet / Dry Air 1250L

    This N2 saving cabinet is designed to control the filling of dry air into the cabinet, so the desired relative humidity in the cabinet can be reached.

  • N2 Nitrogen Cabinet / Dry Air 624L

    This N2 saving cabinet is designed to control the filling of dry air into the cabinet, so the desired relative humidity in the cabinet can be reached. 

  • NeoCut Plus

    NeoCut Plus is a Laser depaneling equipment, capable of performing clean and safe cuts without generating neither dust nor mechanical stress on the electronic components.

  • NeoCut Shape

    The flexible circuit market is primarily driven by the demand for smaller and lighter products; those FPCBs require tighter tolerances and smaller spacing to cut the board after component placement.

  • NeoMark Easy

    NeoMark Easy is the topnotch equipment for those customers who need In Line machines.

  • NeoMark Twin

    An excellent marking system for EMS (subcontractors)

  • NeoRouter Modula

    NeoRouter is the ideal solution for mechanical separation of PCB panels.

  • NeoRouter Modula Dual

    The neo router dual offers the market an innovative solution for high-volume production, in which the PCB depaneling is often the bottleneck.

  • Nozzle 3/4,5 slim form, Versaflow

    Nozzle 3/4,5 slim form, Versaflow

  • PacIFic 2009M VOC-Free Soldering Flux (10L HDPE bottle)

    PacIFic 2009M VOC-Free Soldering Flux (10L HDPE bottle)

  • PacIFic 2009MLF VOC-Free Soldering Flux (10L HDPE bottle)

    PacIFic 2009MLF VOC-Free Soldering Flux (10L HDPE bottle)

  • PacIFic 2010F VOC-Free Soldering Flux (10L HDPE drum)PacIFic 2010F VOC-Free Soldering Flux (10L HDPE

    PacIFic 2010F VOC-Free Soldering Flux (10L HDPE drum)PacIFic 2010F VOC-Free Soldering Flux (10L HDPE

  • PCB Batch cleaner AQUBE LH5

    Fully automatic standard assembled PCBs batch cleaner

  • PCB Batch cleaner AQUBE XH5

    Fully automatic high end assembled PCBs batch cleaner

  • PCB High end Batch cleaner AQUBE XH9

    Fully automatic high end batch cleaner with largest process chamber worldwide

  • PCB High end XL Batch cleaner AQUBE XH7

    Fully automatic high end XL batch cleaner for assembled PCBs

  • PCB Magazines Series 600, 700, 800

    Automation requires precision when magazines are in use in assembly lines. Base and cover plates made of cast aluminum or sheet steel. Side walls made of conductive plastic or metal to be operated in ambient temperatures of 50 to 200°C.

  • PCB Separator HEKTOR 2

    Separates milled PCBs carefully and quickly

  • PCB Separator MAESTRO 2

    Compact, fast and efficient for PCBs with pre-scored groove

  • PCB Separator MAESTRO 2M Motor driven

    Compact, fast and efficient for PCBs with pre-scored groove

  • PCB Separator MAESTRO 3E

    For small and large PCBs with pre-scored groove

  • PCB Separator MAESTRO 4S

    Stress-free separation of pre-scored PCBs

  • PCB Separator MAESTRO 5L

    When large numbers of pre-scored PCBs need to be separated