E-Flex - Magazine Loader
EFL-WHM300SD0TMCI
PCB Magazine loader that loads pcb’s and panels into the SMT Line.
E-Flex - Magazine Loader
EFL-WHM300SD0TMCI
PCB Magazine loader that loads pcb’s and panels into the SMT Line.
€11.150,00 - Not in stock
Hulp, installatie en/of training nodig?
Bel +32 (0)14 42 44 01 of neem contact met ons op
Beschrijving
Our standard loaders are the most cost-effective PCB loaders of the different series. They are used to load the PCB’s into the production line by picking them from standard magazine racks, basically designated for assemblers who use only one size magazine along their process. The magazines are loaded onto the lower platform and pushed manually into a lifter platform, which will go up step-by-step according to a programmed selectable pitch (to push out each PCB one by one into the SMT line). As soon as the lifter reaches the upper position, the empty rack will be pulled back on the upper platform, so it can be removed from the equipment and reloaded again.
Specifications
Minimum board size | 80(L)x80(W)mm |
Maximum board size | 600(L)x460(W)mm |
Different options available |
Our standard loaders are the most cost-effective PCB loaders of the different series. They are used to load the PCB’s into the production line by picking them from standard magazine racks, basically designated for assemblers who use only one size magazine along their process. The magazines are loaded onto the lower platform and pushed manually into a lifter platform, which will go up step-by-step according to a programmed selectable pitch (to push out each PCB one by one into the SMT line). As soon as the lifter reaches the upper position, the empty rack will be pulled back on the upper platform, so it can be removed from the equipment and reloaded again.