Komax - Wire Assembly Machine Zeta 630
KMX-0380000
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer.
Komax - Wire Assembly Machine Zeta 630
KMX-0380000
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer.
Contact us
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Nick Janssen
Product specialist
Description
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer.
The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building without changeover – thanks to the automatic wire changer with 36 positions, the CM 1/5 GS module for five different ferrules and the CM Duo for 4 mm² / 6 mm² sleeves.
With the three special blade pairs, cross sections of 0.22 to 6 mm² can be perfectly processed in sequence. The processing parameters are converted via TopConvert and sent automatically by the Komax WPCS interface directly to the machine without any manual programming effort.
Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range.
- 36 wire variants available in the wire changer
- Precise processing with high-quality cutting unit
- Batch or sequence production without changeover possible
- Processing of up to 5 different ferrules
- Automatic marking system with two inkjet markers
Specifications
| Length range with two-sided processing | 240 – 3000 mm standard tray / 240 – 5000 mm (optional) (*) |
| Length range with one-sided processing | 85 – 3000 mm standard tray / 85 – 5000 mm (optional) (*) |
| Stripping lengths | up to 25 mm |
| Wire cross sections | 0.22 – 6 mm² (AWG 24 – 10) (**) |
| Number of stations | 2 |
| Wire feed speed | Maximum of 10 m/s |
| Wire selector | Maximum of 36 cables (in increments of six cables) |
| Noise level | < 80 (without crimp modules) |
| Electrical connection | 3 × 208 V – 480 V 50/60 Hz; 3 kVA (basic machine) |
| Compressed-air connection | 5 – 6 bar |
| Air consumption | 7 m³/h (without modules) |
| Weight | about 1.700 kg |
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer.
The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building without changeover – thanks to the automatic wire changer with 36 positions, the CM 1/5 GS module for five different ferrules and the CM Duo for 4 mm² / 6 mm² sleeves.
With the three special blade pairs, cross sections of 0.22 to 6 mm² can be perfectly processed in sequence. The processing parameters are converted via TopConvert and sent automatically by the Komax WPCS interface directly to the machine without any manual programming effort.
Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range.
- 36 wire variants available in the wire changer
- Precise processing with high-quality cutting unit
- Batch or sequence production without changeover possible
- Processing of up to 5 different ferrules
- Automatic marking system with two inkjet markers
| Type | With Tape Bundling |
|---|---|
| Max cross section (mm²) | 6 |
