Schleuniger - Pneumatic Crimping Machine CT30ST
SCHLEUN-210000000214
The CT 30 ST Pneumatic Crimping Machine is designed for loose-piece crimping applications.
Schleuniger - Pneumatic Crimping Machine CT30ST
SCHLEUN-210000000214
The CT 30 ST Pneumatic Crimping Machine is designed for loose-piece crimping applications.
Original price was: €3.820,00.€3.086,00Current price is: €3.086,00. - In stock (1)
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Description
Adapter and dies are excluded.
The CT 30 ST Pneumatic Crimping Machine is designed for loose-piece crimping applications. The crimping dies remain parallel throughout the crimping process. This provides a more precise crimp and enables processing of closed barrel terminals and hex crimps. The crimp head delivers up to 14 kN (1.6 tons) of force for open and closed barrel applications including wire end ferrules. The ergonomic 15-degree tilt of the machine provides an optimal viewing angle of the crimping area for safe operation. The CT 30 ST is very simple to set up and operate and accepts all new Schleuniger die sets.
Specifications
Crimping Force | 14 kN (1.6 tons) |
Conductor Cross Section | Open Barrel: Up to 6 mm2 (10 AWG) Insulated Closed Barrel: Up to 6 mm2 (10 AWG) Non-Insulated Closed Barrel: Up to 10 mm2 (8 AWG) Wire End Ferrules: Up to 50 mm2 (1/0 AWG) |
Internal Working Air Pressure | 6 bar / 90 psi |
Crimp Action | Parallel Closure |
Ram Speed (no load) | Approximately 1cm/s |
Safety Shield | Fixed around the crimping dies |
Downloads
Adapter and dies are excluded.
The CT 30 ST Pneumatic Crimping Machine is designed for loose-piece crimping applications. The crimping dies remain parallel throughout the crimping process. This provides a more precise crimp and enables processing of closed barrel terminals and hex crimps. The crimp head delivers up to 14 kN (1.6 tons) of force for open and closed barrel applications including wire end ferrules. The ergonomic 15-degree tilt of the machine provides an optimal viewing angle of the crimping area for safe operation. The CT 30 ST is very simple to set up and operate and accepts all new Schleuniger die sets.
Type | Die Based Crimping |
---|