Komax - Wire Assembly Machine Zeta 640
KMX-0335000
Thanks to the five process modules, Zeta 640 can process up to 36 wires without changeover, from batch size 1 and just-in-time (*) (**).
Komax - Wire Assembly Machine Zeta 640
KMX-0335000
Thanks to the five process modules, Zeta 640 can process up to 36 wires without changeover, from batch size 1 and just-in-time (*) (**).
Contact us
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Nick Janssen
Product specialist
Description
Thanks to the five process modules, Zeta 640 can process up to 36 wires without changeover, from batch size 1 and just-in-time.
Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross-section range. In case of doubt, we are happy to produce samples of your wires.
The Zeta machines assemble the required cables fully automatically on five process modules from A to Z. The wire bundles are either already tied up or sorted in the correct order and prepared for further processing. This greatly simplifies and speeds up installation in the control cabinet and logistics.
The data for the processing parameters can be easily converted with TopConvert via data export from any system and sent directly to the machine at the Komax interface WPCS. This means that the manual programming of articles on the machine is no longer necessary for all automated tasks already accepted. Feeding and subsequent processing are therefore error-free and highly efficient.
- Three pairs of blades with optional incision monitoring (ACD)
- Sorting and binding batches in one process step
- Wire changer with up to 36 wires in cross-section
- High performance with 3 shuttles working in parallel
- Bundled wires with optional tube labeling
Specifications
| Length range with two-sided processing | 240 mm up to 3 m standard / 85 mm up to 240 mm application / 3 m up to 5 m (*) / 5 m up to 10 m (*) |
| Length range with one-sided processing | 85 mm up to 3 m standard / 3 m up to 5 m(*) / 5 m up to 10 m (*) |
| Stripping lengths | up to 25 mm |
| Wire cross sections | 0.22 – 6 mm² (AWG24 – AWG10) (**) |
| Useable transfer length Zeta 640 | 1.880 mm, up to 5 crimp modules C1370 |
| Useable transfer length extension | 1.720 m, up to 5 additional crimp modules C1370 |
| Wire feed speed | Maximum of 10 m/s |
| Wire selector | Maximum of 36 cables (in increments of six cables) |
| Noise level | < 75 dB (without crimp modules) |
| Electrical connection | 3 × 208 – 480 V 50/60 Hz; 10 kVA (basic machine) |
| Compressed-air connection | 5 – 6 bar |
| Air consumption | 12 m³/h, (without modules) |
| Weight | approx. 1.900 kg |
Thanks to the five process modules, Zeta 640 can process up to 36 wires without changeover, from batch size 1 and just-in-time.
Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross-section range. In case of doubt, we are happy to produce samples of your wires.
The Zeta machines assemble the required cables fully automatically on five process modules from A to Z. The wire bundles are either already tied up or sorted in the correct order and prepared for further processing. This greatly simplifies and speeds up installation in the control cabinet and logistics.
The data for the processing parameters can be easily converted with TopConvert via data export from any system and sent directly to the machine at the Komax interface WPCS. This means that the manual programming of articles on the machine is no longer necessary for all automated tasks already accepted. Feeding and subsequent processing are therefore error-free and highly efficient.
- Three pairs of blades with optional incision monitoring (ACD)
- Sorting and binding batches in one process step
- Wire changer with up to 36 wires in cross-section
- High performance with 3 shuttles working in parallel
- Bundled wires with optional tube labeling
| Type | With Tape Bundling |
|---|---|
| Max cross section (mm²) | 6 |
