kolb Cleaning technology - Fully automatic maintenance cleaner AF20
KOLB-090020AF
Fully automatic one chamber system for all maintenance cleaning tasks
kolb Cleaning technology - Fully automatic maintenance cleaner AF20
KOLB-090020AF
Fully automatic one chamber system for all maintenance cleaning tasks
Contact us
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Nick Janssen
Product specialist
Description
kolb AF20 is a state of the art immersion cleaning system with ClosedLoop water reprocessing. It cleans components of flux management systems (cooling units, filters, heat exchangers, containers / plates) of virtually all manufacturers as well as lathe parts, milled parts or die cast components from flux, condensate, oil, dust, grease using the economic and environmentally friendly AirFlow® technology.
In the fully automatic AF20 the items are cleaned, rinsed and dried in one single process chamber which is empty during the loading (no contact to the detergent). After placing the goods to be cleaned into the chamber it is pressure flooded with fine filtered cleaning fluid from a separate tank (tank A) through a PLC-controlled process.
After the goods are cleaned the likewise filtered rinsing media, e.g. water, is pumped into the process chamber from a second tank. After the rinsing the rinse media is pumped out and the drying with a triple HotSpeed warm air unit starts.
Highlights
- Fully automatic one chamber system
- Plug & Work system (connect, fill, start)
- Loading and unloading in an empty process chamber
- Comfortable push-one-button operation
- Fully automatic 3step process: cleaning, rinsing (tap water), drying with HotSpeed warm air
- Short cycle times
- Automatic re-dosage and concentrate mix-unit
- Automatic water change for the rinsing tank
- Maintenance and operation events PLC controlled
- Event issuing and software control via high resolution 7″ display with capacitive multi-touch
- Customized solder-frame and carrier fixture available on demand
- Simple and quick maintenance
- All safety relevant devices are standard features in the basic system configuration
- Certified for solar cell production
Specifications
| Technology base | kolb AirFlow® |
| Control system (Display size) | PLC - Eaton (7“) |
| Standard capacity (per process cycle) | Filters, condensation traps, carriers up to a size of 810 x 435 x 520 mm |
| Process chamber dimensions | W 810 mm • D 435 mm • H 520 mm |
| Max. stencil, carrier, washing frame size | H 800 mm x W 500 mm |
| Circuits | 2 Cleaning, Rinsing |
| Volume Tank A | 230 l • Cleaning |
| Volume Tank B | 230 l • Rinsing tap water |
| Max. cleaning temperature | 50 °C (122 °F) |
| Filtration | Three stages - 1. Full flow coarse filter < 2 mm, 2. Skimmer coarse filter, 3. Fine filter 20“ / 100 - 50 - 10 µm in the circuits |
| Drying System | HotSpeed warm air |
| Drying temperature range | approx. 40 - 45 °C (104 and 113 °F) |
| Power supply | 400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz |
| Power consumption | 3 kW |
| Supply connection 1 (tap water) | 1“ |
| Supply connection 3 (Compressed Air) | 12 mm (87 - 174 psi - 100 l / min) |
| Empty Weight | 460 kg (1,014 lbs) |
| Footprint | 1820 mm x 1150 mm (71.65″ x 45.28″) |
kolb AF20 is a state of the art immersion cleaning system with ClosedLoop water reprocessing. It cleans components of flux management systems (cooling units, filters, heat exchangers, containers / plates) of virtually all manufacturers as well as lathe parts, milled parts or die cast components from flux, condensate, oil, dust, grease using the economic and environmentally friendly AirFlow® technology.
In the fully automatic AF20 the items are cleaned, rinsed and dried in one single process chamber which is empty during the loading (no contact to the detergent). After placing the goods to be cleaned into the chamber it is pressure flooded with fine filtered cleaning fluid from a separate tank (tank A) through a PLC-controlled process.
After the goods are cleaned the likewise filtered rinsing media, e.g. water, is pumped into the process chamber from a second tank. After the rinsing the rinse media is pumped out and the drying with a triple HotSpeed warm air unit starts.
Highlights
- Fully automatic one chamber system
- Plug & Work system (connect, fill, start)
- Loading and unloading in an empty process chamber
- Comfortable push-one-button operation
- Fully automatic 3step process: cleaning, rinsing (tap water), drying with HotSpeed warm air
- Short cycle times
- Automatic re-dosage and concentrate mix-unit
- Automatic water change for the rinsing tank
- Maintenance and operation events PLC controlled
- Event issuing and software control via high resolution 7″ display with capacitive multi-touch
- Customized solder-frame and carrier fixture available on demand
- Simple and quick maintenance
- All safety relevant devices are standard features in the basic system configuration
- Certified for solar cell production
