Schleuniger - PreFeeder 60
SCHLEUN-100000475724
The PreFeeder 60 is a highly dynamic prefeeding machine, which has been developed to feed cable gently to cut, strip terminate machines.
Schleuniger - PreFeeder 60
SCHLEUN-100000475724
The PreFeeder 60 is a highly dynamic prefeeding machine, which has been developed to feed cable gently to cut, strip terminate machines.
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Description
The PreFeeder 60 is a highly dynamic prefeeding machine, which has been developed to feed cable gently to cut, strip terminate machines. The PreFeeder 60 can take wires from all kind of pans and barrels. With a production rate of 9 m/s (depending on wires and barrels) the PreFeeder 60 has been optimized for high-speed fully automatic crimping machines such as the Schleuniger CrimpCenter models. The controlled driving method feeds the wire gently and continuously to the active wire storage, while the intake of the fully automatic crimping machine takes the wire out of the storage in order to further processing. Due to this arrangement, it is possible to run the fully automatic crimping machine at high capacity even if provisioning of wires causes problems.
Specifications
Conductor Cross-Section | Max. 6 mm2 (10 AWG) |
Feed Rate | Mx. 9 m/s (29.5 ft/s) (depending on wire and barrels) |
Storage | 6.4 m (21ft.) for wires up to 4 mm2 (12 AWG) 4.8 m (16 ft.) for wires up to 4 - 6 mm2 (12 - 10 AWG) |
Downloads
The PreFeeder 60 is a highly dynamic prefeeding machine, which has been developed to feed cable gently to cut, strip terminate machines. The PreFeeder 60 can take wires from all kind of pans and barrels. With a production rate of 9 m/s (depending on wires and barrels) the PreFeeder 60 has been optimized for high-speed fully automatic crimping machines such as the Schleuniger CrimpCenter models. The controlled driving method feeds the wire gently and continuously to the active wire storage, while the intake of the fully automatic crimping machine takes the wire out of the storage in order to further processing. Due to this arrangement, it is possible to run the fully automatic crimping machine at high capacity even if provisioning of wires causes problems.
Type | Motorized Feeding |
---|