Mecal - SMST Pull Test Gauge
MEC-871920200
Pull test gauge variable speed for tensile test up to 2.000N
Mecal - SMST Pull Test Gauge
MEC-871920200
Pull test gauge variable speed for tensile test up to 2.000N
€5.074,00 - Not in stock
Need assistance, installation and/or training?
Call +32 (0)14 42 44 01 or contact us
Description
It is used to measure the force – expressed in Newton – needed to pull a terminal off a crimped wire. The pulling speed can be set beetween 15 and 120mm/minute. The instrument has a serial communications port. Every SMST is tuned in our laboratory, and its calibration is carried out with Mecal specific equipment MST 0158, fitted with 546 QDT force analyzer. Also available as splice version.
It is used to measure the force – expressed in Newton – needed to pull a terminal off a crimped wire. The pulling speed can be set beetween 15 and 120mm/minute. The instrument has a serial communications port. Every SMST is tuned in our laboratory, and its calibration is carried out with Mecal specific equipment MST 0158, fitted with 546 QDT force analyzer. Also available as splice version.