Juki CF081E Cut Tape Feeder Finger Feeders 8 Units per Kit with 1 Tape Push Tool
FF-2017700
For Juki CF081E Feeders
Juki CF081E Cut Tape Feeder Finger Feeders 8 Units per Kit with 1 Tape Push Tool
FF-2017700
For Juki CF081E Feeders
€1.784,80 - 2 - 6 weeks
Need a quote, installation, or training?
Call +32 (0)14 42 44 01 or contact us
Nick Janssen
Product specialist
Description
The CF081E Cut Tape Feeder Fingers add a new dimension to Juki mechanical feeders.
Components such as resistors, capacitors, and chips are packaged in small pockets on a long strip, known as component tape. This is normally loaded into the feeder on a full reel.
Cut tape is a cut-off piece of that tape, useful when you only need a limited number of components, for example for a prototype, a small production run, or when your components are supplied as a short strip instead of on a full reel. Normally, such a piece of tape first needs to be extended with an empty leader to pass through the feeder, which costs time and material (splicing).
Installing the Juki Cut Tape Feeder Finger provides relief for tape as short as 1.5″ (38.2 mm), without needing a cover tape leader. Eliminating the cover tape collection process helps prevent feeder jams and machine stops during production. Removing the mechanical components normally used to collect cover tape also reduces feeder maintenance.
Benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1.5″ / 38.2 mm
- Eliminates splicing
- Loads in under 5 seconds
- Eliminates cover tape jams
- Up to 80% faster feeder setup
- Includes a Tape Push Tool for extra loading convenience
The CF081E Cut Tape Feeder Fingers add a new dimension to Juki mechanical feeders.
Components such as resistors, capacitors, and chips are packaged in small pockets on a long strip, known as component tape. This is normally loaded into the feeder on a full reel.
Cut tape is a cut-off piece of that tape, useful when you only need a limited number of components, for example for a prototype, a small production run, or when your components are supplied as a short strip instead of on a full reel. Normally, such a piece of tape first needs to be extended with an empty leader to pass through the feeder, which costs time and material (splicing).
Installing the Juki Cut Tape Feeder Finger provides relief for tape as short as 1.5″ (38.2 mm), without needing a cover tape leader. Eliminating the cover tape collection process helps prevent feeder jams and machine stops during production. Removing the mechanical components normally used to collect cover tape also reduces feeder maintenance.
Benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1.5″ / 38.2 mm
- Eliminates splicing
- Loads in under 5 seconds
- Eliminates cover tape jams
- Up to 80% faster feeder setup
- Includes a Tape Push Tool for extra loading convenience
