Ulmer - Prefeeder ZG200 B3S
ULM-ZG200B3S
A compact, powerful feeding unit that handles cables, hoses and ropes up to 38 mm in diameter with an even, steady feed.
Ulmer - Prefeeder ZG200 B3S
ULM-ZG200B3S
A compact, powerful feeding unit that handles cables, hoses and ropes up to 38 mm in diameter with an even, steady feed.
Contact us
Need a quote, installation, or training?
Call +32 (0)14 42 44 01 or contact us
Nick Janssen
Product specialist
Description
The Ulmer ZG200 B3S is a compact and robust feeding unit. You use it as an active pull-off unit for flexible wires and cables, hoses, ropes and similar materials up to an outer diameter of 38 mm. It connects easily to a wide range of cutting machines and stripping systems, with various connection cables available.
The material is fed by two counter-rotating, high-quality coated conveyor belts, both driven by a powerful servo motor. This lets you feed your material with both power and care, at speeds of up to 2.7 m/s and a pulling force of 240 N.
Features
- Powerful, yet gentle on your material. Two driven belts ensure an even, unobstructed material flow.
- Less deformation. You set the gap between the belts mechanically using a scale, so even pressure-sensitive cables and hoses are not squashed.
- Quick setup. You raise and lower the upper belt pneumatically with a hand valve, so you can insert your material quickly.
- Safe operation. Stainless steel guide nozzles at the inlet and outlet keep your hands away from the intake area.
- Flexible speed control. You choose how to control the speed: with a dancer arm with potentiometer, with the contactless sag control DHS1000D, or with a cable accumulator.
- Compact, robust and Made in Germany.
Specifications
| Compressed air | 6 bar |
| Dimensions | 55 × 43 × 44 cm |
| Feed speed | max. 2.7 m/s |
| Max. outer diameter | 38.0 mm (guide nozzle bore: 40.0 mm) |
| Pulling force | 240 N |
| Supply voltage | 230 V / 50–60 Hz (110 V on request) |
| Weight | 44 kg |
The Ulmer ZG200 B3S is a compact and robust feeding unit. You use it as an active pull-off unit for flexible wires and cables, hoses, ropes and similar materials up to an outer diameter of 38 mm. It connects easily to a wide range of cutting machines and stripping systems, with various connection cables available.
The material is fed by two counter-rotating, high-quality coated conveyor belts, both driven by a powerful servo motor. This lets you feed your material with both power and care, at speeds of up to 2.7 m/s and a pulling force of 240 N.
Features
- Powerful, yet gentle on your material. Two driven belts ensure an even, unobstructed material flow.
- Less deformation. You set the gap between the belts mechanically using a scale, so even pressure-sensitive cables and hoses are not squashed.
- Quick setup. You raise and lower the upper belt pneumatically with a hand valve, so you can insert your material quickly.
- Safe operation. Stainless steel guide nozzles at the inlet and outlet keep your hands away from the intake area.
- Flexible speed control. You choose how to control the speed: with a dancer arm with potentiometer, with the contactless sag control DHS1000D, or with a cable accumulator.
- Compact, robust and Made in Germany.
| Compressed air | 6 bar |
| Dimensions | 55 × 43 × 44 cm |
| Feed speed | max. 2.7 m/s |
| Max. outer diameter | 38.0 mm (guide nozzle bore: 40.0 mm) |
| Pulling force | 240 N |
| Supply voltage | 230 V / 50–60 Hz (110 V on request) |
| Weight | 44 kg |
