Visual Quality System (VCS)
ZOL-VCS
Visual quality system for crimp connections
Visual Quality System (VCS)
ZOL-VCS
Visual quality system for crimp connections
Need a quote, installation, or training?
Call +32 (0)14 42 44 01 or contact us
Description
The Z+F Visual Control System (VCS) is used to inspect and visually monitor wire ends.
It visually determines how a cable end is bent and also checks the processing quality of the cable end. The system can be used as a stand-alone unit for manual processing of cable or wire ends. It can also be integrated into a fully automated cable processing machine. This makes it a flexible solution for a higher degree of automation and better quality assurance.
Multiple cameras analyse the inspected conductor ends in real time, according to the requirements set in the Z+F software.
The Z+F software is included in the scope of delivery. It automatically stores the inspection results and so supports continuous quality assurance. When the system detects a quality defect, a visual alert notifies the operator.
Which quality defects can be detected on an insulated wire end ferrule?
- Missing wire end ferrule
- Damaged wire end ferrule
- Protruding strands due to excessive stripping length
- Strands protruding outside the plastic collar
Specifications
| Cross-section | 0.14 – 16.0 mm² (AWG 26 – 6) |
| Cycle time | 0.8 s per inspection |
| Insertion length | 40 mm |
The Z+F Visual Control System (VCS) is used to inspect and visually monitor wire ends.
It visually determines how a cable end is bent and also checks the processing quality of the cable end. The system can be used as a stand-alone unit for manual processing of cable or wire ends. It can also be integrated into a fully automated cable processing machine. This makes it a flexible solution for a higher degree of automation and better quality assurance.
Multiple cameras analyse the inspected conductor ends in real time, according to the requirements set in the Z+F software.
The Z+F software is included in the scope of delivery. It automatically stores the inspection results and so supports continuous quality assurance. When the system detects a quality defect, a visual alert notifies the operator.
Which quality defects can be detected on an insulated wire end ferrule?
- Missing wire end ferrule
- Damaged wire end ferrule
- Protruding strands due to excessive stripping length
- Strands protruding outside the plastic collar
| Cross-section | 0.14 – 16.0 mm² (AWG 26 – 6) |
| Cycle time | 0.8 s per inspection |
| Insertion length | 40 mm |





