Schleuniger - Stripping Machine B340
SCHLEUN-100000718682
An advanced rotary stripping machine for coaxial, multi-core and sensor cables up to 9 mm in diameter.
3 variants available.
Schleuniger - Stripping Machine B340
SCHLEUN-100000718682
An advanced rotary stripping machine for coaxial, multi-core and sensor cables up to 9 mm in diameter.
3 variants available.
Need a quote, installation, or training?
Call +32 (0)14 42 44 01 or contact us
Description
The Schleuniger B340 is the latest generation of programmable stripping machines in the Schleuniger B Series. With four rotating X-shaped blades, it delivers excellent cutting quality and repeatability across a wide range of cable types, from fine-stranded wires to complex multi-conductor cables and sensor lines.
High mechanical precision, advanced software features and short cycle times let the B340 deliver maximum productivity. The machine handles conductor cross-sections from 0.013 to 16 mm² (AWG 36–5) and diameters up to 9 mm, with strip lengths up to 80 mm and pull-off lengths up to 40 mm.
The S.Drive B Series software allows intuitive programming via a 5″ colour touchscreen. It supports automatic diameter detection, cable-end detection and sequential processing of multi-conductor cables.
As an option, the machine can be equipped with a foot pedal, an air kit with extraction system, or a kit for short jacket strips on multi-conductor cables.
Thanks to universal blades and clamps, no tool changes are needed. That is a major advantage in production with frequent cable changes. The B340 can also be integrated into automated production systems, which makes it ideal for both standalone and inline applications.
New: AIC and ACD – smarter stripping, less scrap
The B340 is now also available with two new Schleuniger technologies. With them, quality depends far less on your operator’s experience.
AIC – Adaptive Incision Control
- No programming skills required. You insert the cable and the machine measures the correct parameters itself (teach-in mode).
- IQ Run. You only select the strip length, insert the cable and produce. Changeovers are much faster, and wrong settings no longer cause scrap.
- Adapts during production. Tolerances in cable diameter and non-concentric conductors are compensated automatically. You get consistent quality with fewer interruptions.
- Less training needed. New or less experienced operators are productive quickly.
ACD – Automatic Conductor Detector
- Every strip checked. ACD continuously monitors whether the blade touches the conductor and immediately flags every nick or scratch.
- Your own tolerances. By default, any damage is prevented. You can also set the maximum allowable incision depth yourself.
- Ready for demanding industries. Full batch traceability means you no longer need separate quality inspection. That makes it ideal for aerospace, defence and medical applications.
Choose the version that suits you
- Plus: the standard machine with article library and multi-conductor processing.
- Pro (new): with AIC, for production with less skilled staff and high quality requirements.
- Ultra (new): with AIC and ACD, for the highest quality requirements.
Standard machine configuration
- Clamping jaw: Gripper JAW Standard
- Blade: Blade HM
- License Article library: Yes
- Standard packaging
Specifications
| Air connection (optional) | 6 bar (with optional air kit) |
| Conductor cross-section | 0.013 – 16 mm² (AWG 36 – 5) |
| Dimensions (L × W × H) | 521 × 132 × 317 mm |
| Max. cable diameter | 9 mm |
| Max. pulling lengt | 40 mm |
| Max. stripping length | 80 mm |
| Power supply | 100 – 240 V AC, 50/60 Hz |
Downloads
The Schleuniger B340 is the latest generation of programmable stripping machines in the Schleuniger B Series. With four rotating X-shaped blades, it delivers excellent cutting quality and repeatability across a wide range of cable types, from fine-stranded wires to complex multi-conductor cables and sensor lines.
High mechanical precision, advanced software features and short cycle times let the B340 deliver maximum productivity. The machine handles conductor cross-sections from 0.013 to 16 mm² (AWG 36–5) and diameters up to 9 mm, with strip lengths up to 80 mm and pull-off lengths up to 40 mm.
The S.Drive B Series software allows intuitive programming via a 5″ colour touchscreen. It supports automatic diameter detection, cable-end detection and sequential processing of multi-conductor cables.
As an option, the machine can be equipped with a foot pedal, an air kit with extraction system, or a kit for short jacket strips on multi-conductor cables.
Thanks to universal blades and clamps, no tool changes are needed. That is a major advantage in production with frequent cable changes. The B340 can also be integrated into automated production systems, which makes it ideal for both standalone and inline applications.
New: AIC and ACD – smarter stripping, less scrap
The B340 is now also available with two new Schleuniger technologies. With them, quality depends far less on your operator’s experience.
AIC – Adaptive Incision Control
- No programming skills required. You insert the cable and the machine measures the correct parameters itself (teach-in mode).
- IQ Run. You only select the strip length, insert the cable and produce. Changeovers are much faster, and wrong settings no longer cause scrap.
- Adapts during production. Tolerances in cable diameter and non-concentric conductors are compensated automatically. You get consistent quality with fewer interruptions.
- Less training needed. New or less experienced operators are productive quickly.
ACD – Automatic Conductor Detector
- Every strip checked. ACD continuously monitors whether the blade touches the conductor and immediately flags every nick or scratch.
- Your own tolerances. By default, any damage is prevented. You can also set the maximum allowable incision depth yourself.
- Ready for demanding industries. Full batch traceability means you no longer need separate quality inspection. That makes it ideal for aerospace, defence and medical applications.
Choose the version that suits you
- Plus: the standard machine with article library and multi-conductor processing.
- Pro (new): with AIC, for production with less skilled staff and high quality requirements.
- Ultra (new): with AIC and ACD, for the highest quality requirements.
Standard machine configuration
- Clamping jaw: Gripper JAW Standard
- Blade: Blade HM
- License Article library: Yes
- Standard packaging
| Air connection (optional) | 6 bar (with optional air kit) |
| Conductor cross-section | 0.013 – 16 mm² (AWG 36 – 5) |
| Dimensions (L × W × H) | 521 × 132 × 317 mm |
| Max. cable diameter | 9 mm |
| Max. pulling lengt | 40 mm |
| Max. stripping length | 80 mm |
| Power supply | 100 – 240 V AC, 50/60 Hz |








